The First Years Baby Bottle Warmer and Sterilizer User Manual

The First Years Baby Bottle Warmer and Sterilizer

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2. Do not place your hands in or around the warming chamber during heating.
3. To prevent injury, always shake the bottle well and test the temperature of the contents before giving the bottle to your child. Also, if heating baby food, always test the temperature before feeding your child.
4. Do not touch hot surfaces. Use handles.
5. To protect against electrical shock, do not immerse the cord, plugs, or appliance in water or other liquids.
6. Allow the unit to cool before removing the warming chamber basket.
7. Close supervision is necessary when any appliance is used near children.
8. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
9. TOMY does not make, offer, or recommend any accessory attachments for this unit. The use of any accessory
   attachment may cause injury.
10. For household use only.
11. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
12. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in
    any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
13. Do not use outdoors.
14. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
15. This product does not require preheating.
16. Do not place on or near a hot gas or electric burner, or in a heated oven.
17. The user should not attempt to service or repair the unit.
18. No serviceable parts inside.
19. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
20. Save these instructions for future use.
21. To disconnect, turn any control to “OFF”, then remove the plug from the wall outlet.
22. Do not use the appliance for anything other than its intended use.
23. Before serving, be sure the food is at a safe temperature.
24. Before serving, unplug the cord from the wall outlet. Do not leave the cord within the child’s reach.
25. The heating element surface is subject to residual heat after use.
26. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
27. Children should be supervised to ensure that they do not play with the appliance.

WARNINGS

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

1. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
2. Longer extension cords are available and may be used if care is exercised in their use.
3. If a longer extension cord is used:
   • A. The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
   • B. The cord should be arranged so that it will not drape over the countertop or tabletop, where it can be pulled on by children

WATER MEASURING GUIDE – RECOMMENDED MINUTE MARKINGS

TO USE

HEAT BOTTLE / JAR:

1. Place the nit on a flat surface and plug it into an AC outlet.
2. Fill the water vial with room temperature water to the recommended time marking (minutes) listed in WATER MEASURING GUIDE. The time listed is a recommendation ONLY. The vial markings DO NOT provide exact durations.
3. Pour water from the vial into the warming chamber.
4. Always place the basket into the warming chamber first before adding the bottle or jar. Do not place the bottle/jar directly onto the heating element.
   • A. Wide-neck bottle: Place the bottle into the lift-out basket.
   • B. Slim neck bottle (straight or angled): Place the adapter ring on top of the basket warmer and then place the bottle into the basket.
   • C. Disposable bottle or baby food jar: Insert into the lift-out basket. NOTE: Remove the lid of the baby food jar before placing it into the lift-out basket.
5. Press the ON button. The button will light to indicate that the unit is heating.
6. When the light turns off, the warming cycle is complete. The heater shuts off automatically.
7. Remove the bottle/jar from the chamber and allow it to cool before handling. Adjust the level of water (minute marking) in the water vial as follows:
   • If the contents are too hot, use less water in the water vial.
   • If the contents are too cool, use more water in the water vial.
   • ALWAYS mix the bottle / stir the food well and test the temperature of the contents before giving the bottle to the child.
8. Wait 10 minutes before heating a second bottle to avoid overheating.

SANITIZE:

1. Fill the water vial to 3 minutes.
2. Place 1 or 2 pacifier(s) in the lift-out basket.
3. Place the sanitizer lid on the lift-out basket.
4. Pour water into the warming chamber.
5. Place the lift-out basket with sanitizer lid into the Warming Chamber.
6. Press the ON button.
7. When the light turns off, remove the lift-out basket with sanitizer lid.

ALWAYS allow the pacifier to cool before giving it to the child.

TO CLEAN

• Water vial: Dishwasher safe (top rack only).
• Baskets, adapter ring: Dishwasher safe (top rack only).
• Sanitizer Lid: Dishwasher safe (top rack only).
• Bottle warmer unit: ALWAYS TURN OFF AND UNPLUG BEFORE CLEANING. Wipe the surface of the unit as well as the inside warming chamber with a damp cloth or sponge using mild liquid soap. Wipe with clear water. Air dry. DO NOT  IMMERSE THE BOTTLE WARMER IN WATER.Do not use scouring pads, solvents, or abrasive cleaners, as they could damage the unit. Warming chamber:
• Mineral deposits (usually white in color) may form on the inner surfaces of the warming chamber and can cause damage to the unit

To remove mineral deposits:

1. Unplug the unit.
2. Remove the basket, and wash separately as indicated above.
3. Pour 2 oz. Vinegar into the warming chamber and let it stand for an hour or two (longer if necessary).
4. Pour out the vinegar and rinse the chamber two or three times with 3 or 4

FOR MORE MANUALS BY The First Years, VISIT MANUALSLIBRARYY

The First Years Baby Bottle Warmer and Sterilizer-FAQs