TRIBIT OpenGo BTH99 True Wireless Earbuds
Package Contents
Product Parts
How to Wear the Earbuds
On/ Off
The first time you use the earbuds, please tear off the insulation sticker. Then place them in the charging case and close it.
Bluetooth Connection Guidelines
- Connect the earbuds with a Bluetooth device.
Open the top cover of the charging case, and the earbuds will automatically enter Bluetooth pairing mode. Open the Bluetooth function in the Bluetooth device, refresh the Bluetooth device search, and click the audio device named “openGo” to connect. After successfully connecting, the earbuds indicator will go off
- The two ways to connect with other devices are as follows:
- Please disconnect the earbuds from the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode.
- Touch four times on any earbuds, then long-press for 3 seconds. The earbuds’ white indicator light flashes rapidly twice to indicate a successful reset.
Button Functionality
Note: You can customize the touch buttons through the TRIBIT APP.
Charging Case Indicator Display
- When the cover is opened, the display inside the charging case indicates the current charge level of the charging case.
Charging Guidelines
- Charging of the earbuds: Put the earbuds into the charging case. Then close the cover a,, nd charging will begin.
Charging time of earbuds: about 90 minutes - Charging of the charging case: Insert one end of the USB cable into a power supply that supports 5V output and the other end into the charging port of the charging case.
Charging time of the charging case: about 200 minutes
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment..nt
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communication. However, there is no guarantee that interference won’t occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. Users are encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit that is different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 75 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (l) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Frequency band & Maximum transmission power
- Frequency band: 2402-2480MHz
- Maximum transmission power: -6 ~+4dBm
Warning
- Do not dismantle or modify the earbuds for any reason; otherwise, any malfunction of the earbuds is not covered by the warranty.
- Do not deliberately contact the earbuds with liquids, as whthisy damage the earbuds may be damaged and invalidate the warranty becomes invalid.
- Do not place the earbuds in an environment where the temperature is too high or too low.
- This product includes a built-in lithium battery. It is forbidden to disassemble, bump, squeeze, or throw the product into fire.
- Please keep the earbuds away from children to avoid accidental swallowing and other injuries.
The power delivered by the charger must be between min 1 Watts required by the radio equipment, and max 5.5 Watts to achieve the maximum charging spee.
Manufacturer: Dongguan Lidu Electronic Technology Co., LTD
Model: LD 523450
Address: Floor 5, Building 2, Hesheng Industrial Park, 21 Dongfeng Nanshe Road, Humen Town, Dongguan City, Guangdong Province.
Weight: 18g±0.5g
capacity: l000mAh 3.7V 3.7Wh
Caution:
- Do not disassemble, impact, squee,z ,,e or put into the fire.
- Do not place it in a hot environment.
- Do not use it aftimmersinggg.
- Please use the designated charger to charge.
Applicable fire extinguishers: dry powder fire extinguishers.carbon dioxide fire extinguishers
Chemical Components: Li-ion Polymer Battery
Key Raw Materials: Lithium Cobalt Oxide, Graphite, Aluminum (41), Copper (Cu)
DATE: 202405
Manufacturer: Shuoyue
Model: SY401025
Address: No. 15 Renmin South Road, Zaoyang City, Hubei Province
Weight: 7.7Bg±0.5g
Capacity: 70mAh 3.N 0.259Wh
Caution: Do not disassemble, impact, squeeze, or put into the fire.
Do not place it in a hot environment.
Do not use it after immersing.
Please use the designated charger to charge.
Applicable fire extinguishers: dry powder fire extinguishers.carbon dioxide fire extinguishers
Chemical Components: Li-ion Polymer Battery
Key Raw Materials: Lithium Cobalt Oxide, Graphite, Aluminium(AI), Copper (Cu)
DATE: 202405
For more manuals by Tribit, visit ManualsLibraryy
TRIBIT OpenGo BTH99 True Wireless Earbuds- FAQs
How do I pair the Tribit OpenGo BTH99 earbuds?
Open the charging case and keep the earbuds inside. Enable Bluetooth on your device and select “TRIBIT OpenGo BTH99” from the available list. The buds will connect automatically.
How do I put the earbuds into pairing mode?
Open the case, wait 5–6 seconds, then open the lid again. The earbuds should enter pairing mode automatically. If already paired with another device, reset them first.
How do I reset Tribit earbuds?
Turn off both earbuds. Touch and hold each touch sensor for 10 seconds until the indicator blinks once and turns off. Within 5 seconds, double-tap both earbuds to complete the reset.
How do I factory-reset the earbuds without a physical button?
Use the touch controls by long-pressing for 10–12 seconds, or reset through your phone’s Bluetooth settings by deleting/forgetting the device and repairing.
How do I turn on the Tribit OpenGo earbuds?
Remove them from the charging case and they will power on automatically. If needed, press and hold the touch area until the indicator lights up.
How do I charge Tribit earbuds?
Place the earbuds in the charging case. The case will begin charging them automatically using its internal battery.
How do I know when the earbuds are fully charged?
The case indicator turns green when the earbuds and case are fully charged. An amber/orange light means charging is still in progress.
How long do Tribit earbuds last on a full charge?
Depending on the model, playtime can go up to 110 hours with the charging case.
Why is one earbud not charging in the case?
Check if the charging pins are clean, reseat the earbud securely, and ensure the case has enough battery. Dust or misalignment often causes charging issues.
Why are my earbuds not connecting?
Ensure Bluetooth is on, the earbuds are fully charged, and no other device is connected to them. Try forgetting the earbuds from your phone and pairing again.