2Boom TWS155 ROAM AIR Wireless Earphones
Getting started
- Remove the product
- Remove the product from the box.
- Remove any packaging from the product.
- Please retain all packaging you have checked and counted all the parts and the contents against the list.
- Please fully charge the earphone and charging case before first using.
Package Contents
- TWS155
- USB charging cable
- Manual
Safety Rules
- To ensure safety, please follow the rules in this manual. Before using the Bluetooth earphone, we strongly recommend that you read this manual carefully.
- Please pay to the sharp edge, uneven surface, metal parts, andaccessories.
- Please do not open, dismantle or repair this product, this may lead to fire, electronic breakdown or even completely damage the product; these are not included in thewarranty.
- Do not wipe the product with oil and other liquids.
- Please do not use this product in the places where there is a personal safety risk and danger.
Connect to your phone quickly
- The first time to manually connect the phone. If it’s the first time to use the earbuds, you can connect your phone by two easy steps.
- a. Take out the earbuds from charging case, the two earbuds will automatically pair after 5 seconds.
- b. Open the Bluetooth mode on your phone, then search the device name “2BOOMTWS155” to connect.
- Automatically connect with mobile phone
- You only need to manually connect to your phone when first using. next themes when you take out the earbuds from the charging case, they will automatically pair with each other and connect to your phone.
Battery Case and Earphone charging
- Earphone: Put the earbuds into the case, the earbuds will be charged directly.
- Charging case: Connect the case with your power by USB cable to charge. The red light will be on when charging, once fully charged the red light will turn off and stop charging.
Battery Function Definition
Product Specification
- Earphone Specification:
- Charging box parameter
- (Note: Battery life & charging time may vary based on usage & types of devices used.)
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) this device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
- The devices has been evaluated to meet general RF exposure requirement， the device can be used in portable exposure condition without estriction
For more manuals by 2Boom, visit ManualsLibraryy
2Boom TWS155 ROAM AIR Wireless Earphones-FAQs
How do I turn on the 2Boom TWS155 earphones?
Press and hold the “ll<” button for 2-5 seconds until you hear an indication tone. Follow the pairing steps to connect them to your device.
How do I charge the 2Boom earphones?
Connect the USB cable to the charging port and plug the other end into a power source. A red LED light indicates charging. It takes 5-7 hours for a full charge, and the red light turns off once fully charged.
How can I check if my wireless earphones are charged?
Open the charging case with the earbuds inside. The LED lights on the case will blink or change color to indicate the earbuds’ battery status.
What are the 2Boom TWS155 ROAM AIR Wireless Earphones?
They are true wireless earphones designed for seamless connectivity and high-quality audio. They include a charging case for convenient use and portability.
Is it safe to charge my earbuds overnight?
Yes, overcharging is not an issue. The charging case stops supplying power to the earbuds once they are fully charged.
What does the orange light on my headphones mean?
An orange light indicates the headphones are charging. A white light shows they are fully charged.
Why isn’t my 2Boom speaker charging?
If your speaker isn’t charging, try using a different charging cable or power outlet. The issue may be due to a faulty cable or power source.