Bissell 4039 PowerClean FurGuard Cordless Stick Vacuum User Guide

Bissell 4039 PowerClean FurGuard Cordless Stick Vacuum

IMPORTANT SAFETY INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

• Unplug the charger from the electrical socket when not in use, before cleaning, maintaining, or servicing the appliance.
• Do not use outdoors or on wet surfaces.
• Do not use a motorized nozzle on wet surfaces.
• Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
• Do not use for any purpose other than described in this user guide. Use only the manufacturer’s recommended attachments.
• Do not charge with a damaged charger or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, have it repaired by a qualified technician.
• Do not pull or carry the charger by the cord, use the cord as a handle, close the door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
• Do not unplug the charger by pulling on the cord. To unplug, grasp the charger plug, not the cord.
• Do not handle the charger, including the charger plug and charger terminals, with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts of the appliance and its accessories.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
• If the appliance has a hand-held accessory like a pet brush, motor-driven head, etc., the user shall avoid entrapment.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters in place.
• Risk of injury from moving parts. Brush may start unexpectedly. Turn OFF before cleaning or servicing.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliances that have the switch on invites accidents.
• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use only with E-TEK charger Model ZD024M300100US or ZD024A300075US.
• Do not use any battery pack that is not designed for use with the vacuum. Use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior, resulting in fire, explosion, or risk of injury.
• Do not expose the battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C/265°F may cause an explosion.
• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range 4–40°C/40–104°F. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Do not modify or attempt to repair the battery pack except as indicated in the instructions for use and care.
• Keep the temperature range between 4–40°C/40–104°F when charging the battery, storing the unit, or during use.
• Do not charge the machine outdoors.
• For use only with battery pack 1644207, 1643449, 4141, or 1644206, 1643447, 4143, or 1646404, 1644545, 4169.
• Do not turn your vacuum ON until you are familiar with all instructions and operating procedures.
• If the appliance is to be stored unused for a long period, the batteries should be removed.
• Seek medical advice immediately if the battery pack or parts of the battery pack have been swallowed.
• Do not remove the battery from its original packaging until required for use.
• Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire. Do not dismantle, open, or shred the battery pack. Do not subject the battery pack to mechanical shock. Dispose of used batteries promptly and properly.
• Keep batteries out of reach of children.
• The battery must be removed from the appliance before it is scrapped.
• Dispose of used batteries promptly.
• The battery is to be disposed of safely.
• Keep the appliance on a level surface.
• Do not carry the vacuum cleaner while in use.
• Do not use the appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
• Do not use it to pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc.).
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
• Plastic film can be dangerous. To avoid the danger of suffocation, keep away from children.
• Always turn off this appliance before connecting or disconnecting the motorized foot and FurFinder Tool.

Warranty

Limited 5-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for complete warranty information.

Terms and Conditions

Your purchase is subject to the BISSELL Terms and Conditions, which include dispute resolution through arbitration and class waiver. For complete terms or to opt out of arbitration or class waiver, visit BISSELL.com/terms-of-use or call 1-800-237-7691.

TOOLS INCLUDED IN THE BOX WILL DIFFER BY MODEL

To see what’s included with your purchase, check the “Carton Contents” list on the top flap of the box.

Assembly

1. Connect the extension wand to the motorized foot until it clicks.
2. Connect the hand vacuum to the extension wand until it clicks.
3. Charge before first use.

Assembling the Wall Mount

1. Pull and remove the wall mount from the plate.
2. Secure the plate to the wall with the three screws, making sure the charging cable reaches from the wall mount to the outlet. Note: Use the provided drywall anchors unless drilling directly into a stud.
3. Slide the mount onto the plate until it clicks.
4. Connect the charger to the side of the mount, then plug it into the wall.
5. Place the vacuum on the mount.
6. Attach tools to the mount. They will click into place.

Charging the Battery

Charging Without Wall Mount

1. Power OFF. Press and hold the battery release button, then pull the battery out of the vacuum.
2. Plug the charger into the wall.
3. Plug the charger into the battery.

Charging With Wall Mount

1. Power OFF. Place the vacuum on the wall mount. The machine should start charging automatically when properly mounted. Battery indicator lights flash when charging.
2. The machine will take up to 3 hours to charge. Battery lights will turn off when fully charged.

Charging on a Unit Separate from the Wall Mount

1. Power OFF. Plug the charger into the back of the hand vacuum. Battery indicator lights flash when charging.
2. The machine will take up to 3 hours to charge. Battery lights will turn off when fully charged.

Using Your Vacuum

This vacuum can be used as a stick vacuum, hand vacuum, or extended reach with a hand vacuum and wand. For best results, use Eco mode for carpet cleaning.

1. Press the power button to turn the machine ON. It will start in Medium mode.
2. Choose your cleaning mode for your task and surface type. Press the mode button to switch between three modes:
3. Eco: For smaller light messes. RUNTIME up to 50 mins.
4. Medium: Optimal balance of power and runtime. For most regular household messes. RUNTIME up to 20 mins.
5. Turbo: For heavy messes that require maximum suction power. Use sparingly to preserve battery life. RUNTIME up to 12 mins.

Above-Floor Cleaning

Using the Hand Vacuum

1. Power OFF. Press the release button to remove the extension wand or tools.
2. Attach your desired tool. Note: The hand vacuum has a built-in crevice tool.
3. Use a tool to clean furniture, stairs, or other surfaces.

Using the Extension Wand

1. Power OFF. Use your foot to gently press the wand release lever. Pull up on hand vacuum to remove.
2. Attach your desired tool. Note: The hand vacuum has a built-in crevice tool.

Emptying the Dirt Tank

1. Power OFF. Press the release button on the dirt tank and pull outward to remove.
2. Pull the separator out of the dirt tank.
3. Tap the separator on the waste bin to remove debris.
4. Empty debris into the waste bin.
5. Reinstall the separator.
6. Reinstall the dirt tank by aligning the bottom of the tank with the notch on the hand vacuum. Rotate the tank inward until it clicks into place.

Cleaning and Replacing the Filters

Pre-Motor Filter

1. Power OFF. Remove the dirt tank.
2. Pull the pre-motor filter down to remove.
3. Remove the pre-motor filter from the filter basket.
4. Rinse under warm water.
5. Let it dry for 24 hours before reinstalling. Note: A wet filter will affect suction performance.
6. Place the filter back into the basket with the foam filter on the bottom. Insert the filter basket into the hand vacuum, aligning the basket clip with the groove. Push the back upward until it clicks into place.

Post-Motor Filter

For optimal performance, replace the filter every 3 months.

1. Power OFF. Remove the dirt tank.
2. Remove the pre-motor filter basket.
3. Post-motor filter is located inside the hand vacuum. Twist the post-motor filter clockwise to unlock and remove.
4. Wipe the post-motor filter with a cloth to clean off any debris.
5. Reinstall by twisting counterclockwise back into the machine.
6. Reinstall the pre-motor filter.

Maintaining the Brush Roll

1. Power OFF. Remove the foot from the extension wand. Press the brush roll release button.
2. Remove the brush roll and clear debris.
3. Wipe the brush roll and chamber with a dry cloth.
4. Insert the brush roll into the foot, ensuring the flat surface faces out.
5. Lower the brush roll latch until it clicks into place, securing the brush roll.
6. Press the tool brush roll release button and pull the brush roll out of the chamber.
7. Wipe the brush roll and chamber with a dry cloth.
8. Reinstall the brush roll into the tool.

Troubleshooting

Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit support.BISSELL.com.

For More Manuals By Bissell, Visit ManualsLibraryy

Bissell 4039 PowerClean FurGuard Cordless Stick Vacuum -FAQS