ARTSUN VM-216 Auto Drive Bluetooth FM Transmitter User Guide

ARTSUN VM-216 Auto Drive Bluetooth FM Transmitter

Table of Contents

Safety Guide

(1) Do not drop, puncture or disassemble this product;
(2) This product is not waterproof, please do not expose it to rain or water splashing;
(3) For safety, do not prolong exposure to direct sunlight;
(4) Do not place this product in an open flame that may cause an explosion;
(5) Clean with a clean soft cloth and do not use any corrosive cleaning agent;
(6) Drive safely. Do not operate this product while driving.

Short press the voice button to wake up the voice assistant, voice navigation, and voice dial;
The remote control can be glued to the steering wheel to answer the phone and switch songs while driving;
Supports mobile phone A2DP function, plays high-quality mobile music directly after connecting to Bluetooth;
After connecting to Bluetooth, it will automatically connect back after power on and enter the pairing state automatically:
AUX supports U disk to play MP3/WMA/WAV/FLAC/APE format music
Comes with car charger, output 5V-2.4A;
This device has a car battery voltage display function;
Double-press the answering button on the remote control to call back the last call record
Long press the previous track button on the remote control to disconnect the Bluetooth;
Long press the next track button on the remote control to switch Bluetooth/AUX/USB mode;
When the remote control battery is dead, please replace the battery

(1) Insert the product into the car cigarette lighter and start the car engine, it will be powered on automatically.
(2) Take out the battery insulation sheet, tear off the 3M glue on the back of the remote control and paste it on the steering wheel where it is easy to operate
(3) Long press the voice button to enter the frequency setting interface, through the previous track button and next track button to adjust the transmit frequency;
(4) Turn on your car’s FM radio stations and adjust the frequency to match with the frequency on the transmitter which supports 199 frequencies between 88.1MHz-107.9MHz;
(5) Enable Bluetooth on your smartphone and search for available Bluetooth devices, select “VM-216” and connect.

Music Play

When the VM-216 Bluetooth FM Transmitter is successfully connected to your smartphone, you can play music from your phone, the music will be transmitted to your car stereo via Bluetooth, you can also play the music from a U disk; And to further reduce the audio signal loss during the wireless transmission, you can even connect your phone or any MP3 audio device with our product by using a 3.5mm AUX cable.
Hands-free Phone Calls
When the VM-216 Bluetooth FM Transmitter is successfully connected to your smartphone, you can enjoy convenient hands-free phone calls.

Charging

It contains two USBs; one is used to charge 5V-2.4A, and the other is used to play USB music.

Replacement battery

The remote control is equipped with a battery slot. When the remote control battery is dead, insert the pin into the battery removal hole, and the battery slot will pop up, and the battery can be replaced.
Note: You will need to purchase CR2032 button batteries for replacement.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) this device may not cause harmful interference, and
- (2) This device must accept any interference received that may cause undesired interference.

For more manuals by Artsun visit, ManualsLibrary