DoHonest V33 HD 1080P Baby Car Camera User Manual

DoHonest V33 HD 1080P Baby Car Camera

System Connection Diagram

First, take a look at how the system components all connect together:

Recommended Installation Locations

• Camera: Close to rear marker lights, centered on vehicle
• Monitor: Dashboard area for easy viewing

Cable Connections

• Red wire to ignition hot (+) 12-32 volts
• Black wire to ground (-)
• Green trigger wire to backup light or backup beeper wire to activate monitor when in reverse

Powering the System

1. Connect the red wire (ACC+) to the fuse switch
2. Locate your vehicle’s circuit fuse box
3. Connect the red wire to the corresponding power fuse (12- 32V)

Note: Connecting directly to the battery will keep camera always on and drain the battery, so use ignition switched power.

Installing the Camera

1. Choose the ideal centered rear location
2. Mark and drill holes, routing camera wire through
3. Secure bracket with screws
4. Adjust the angle as needed

Installing the Monitor

1. Choose an easily viewable dashboard area
2. Remove monitor and secure bracket with screws
3. Place the monitor in the bracket
4. Adjust the angle for best viewing

Control Operation Guide

The system comes with a handy control to operate all functions:

Buttons:

• Power button
• Video select button
•  Left arrow (Positive/increase) button
• Menu button
• Right arrow (Negative/decrease) button
• Mode select button: Rotate flip image/normal/mirror image setting

Function Operations:

• V1/V2 Button: Switch between CH1 and CH2 camera channels
• Mode Button: Rotate/flip image between normal and mirror modes
• Power Button: Turn monitor on/off and standby
• Menu Button Operations:
  • Press 1 time: Enter brightness adjust mode
    • Use +/- to increase/decrease value (0-40, default 20)
    • Exits after 10 seconds
  • Press 2 times: Enter contrast adjust mode
    • Use +/- to increase/decrease value (0-40, default 20)
    • Exits after 10 seconds
  • Press 3 times: Enter color adjust mode
    • Use +/- to increase/decrease value (0-40, default 20)
    • Exits after 10 seconds
  • Press 4 times: Enter language adjust mode
    • Use +/- to cycle languages (English, French, etc
    • The default is English
    • Exits after 10 seconds
  • Press 5 times: Enter default settings mode
    • Use +/- to reset brightness, contrast, color, volume, and ruler
    • Language, RLUD, and VCOM cannot be reset
    • Exits after 10 seconds
  • Press 6 times: Enter volume adjust mode
    • Use +/- to increase/decrease value (0-40, default 20)
    • Exits after 10 seconds
  • Press 7 times: Enter RLUD adjust mode (rotate/flip image)
    • Use +/- to cycle between 1, 2, 3, 4 settings
    • Rotates/flips each camera channel individually
    • Allows correct front/rear orientation (e.g. 4=rear, 3=front)
    • Exits after 10 seconds
  • Press 8 times: Enter VCOM adjust mode
    • Use +/- to increase/decrease value (0-40, default 20)
    • Exits after 10 seconds
  • Press 9 times: Enter parking guideline (ruler) adjust mode
    • Use +/- to increase/decrease value
    • NOTE: Valid for CH2 channel only, not CH1
    • Exits after 10 seconds
  • Press 10 times: Enter version check mode
    • Exits after 10 seconds
• Parking Guideline Setting: Same as Menu button press 9 times
• Mirror Image Setting: Same as Menu button press 7 times

For more manuals by DoHonest, visit ManualsLibraryy

DoHonest V33 HD 1080P Baby Car Camera-FAQs