Cyber Acoustics CA-SP34BT Bluetooth Speakers User Manual

Cyber Acoustics CA-SP34BT Bluetooth Speakers

Introduction

This speaker system is designed to deliver superior audio performance to home theaters, computers, tablets, smartphones, iPod®, MP3 players, DVD players, and other portable audio devices. The system offers high efficiency, long excursion drivers combined with a low distortion, high powered amplifier to provide clarity with deep bass, delivering a greater dynamic audio range.

Box Contents

• 2 x satellite speakers
• Subwoofer
• RCA / 3.5mm Y Adapter
• Owner’s guide with connection diagram

Caution

• Do not plug the power supply in until all connections are made.
• Use only the AC power cable supplied with these speakers.
• Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as furniture wax, bleach, benzene, acetone, or ammonia.
• Keep the speaker away from the source of heat, such as stereo amplifiers, space heaters, stoves, and heat vents.

Speaker Preparation

• Subwoofer—place subwoofer in desired location. For best performance place on floor near the wall. Adjust distance from the corner or wall to affect quality of bass performance as desired. Direct open port toward wall to increase bass punch.
• Satellite Speakers—For best stereo separation, place on opposite sides of the listening device, computer, or TV screen (as far apart as possible is usually best). For example, if you are listening to the speakers using a laptop on a desk, place the left satellite speaker on the far left corner of the desk, and the right satellite speaker on the far right corner of the desk.

Speaker Connection

You can connect these speakers to a variety of devices, such as home theater, laptop, computer, tablet, smartphone, iPod, MP3 player, CD player, DVD player, and other audio devices. Please read the following instructions along with the diagrams provided to identify which diagram most closely matches your connection source.

Bluetooth Connection: First-time connection with new devices

• When the system is switched on, it will go into the Bluetooth pairing mode by default. The
• Bluetooth LED status light will begin blinking. Search your device’s Bluetooth list for “CA 2.1 BT SPEAKER” and tap to connect/pair.
• After a successful connection, a tone will sound, and the Bluetooth LED status light will stop flashing and turn solid blue.

Reconnecting with previous devices

• When the system is on, the speaker system will automatically search and attempt connect with the last paired device.
• Make sure this Bluetooth source is nearby the system to automatically reconnect.

LINE I N Connection

• Speakers default to Bluetooth mode when initially turned on. Press the Source button once and you will hear a tone as the system switches to LINE IN mode. The LED status light will change to solid GREEN.
• Connect your source device to the LINE IN jacks on the back of the subwoofer.

LINE IN Connection

Controls & features

Control Panel

1. Master volume control – Turn the knob to adjust the master volume of the speaker system.
2. Treble volume control – Turn the knob to adjust the tone of the speaker syste.m
3. Bass volume control – Turn the knob to adjust the bass volume
4. Headphone output jack
5. Status LED – Blinking Blue indicates Bluetooth pairing mode; Solid Blue indicates Bluetooth successfully connected; Solid Green indicates LINE IN mode.
6. Change of light pattern – LED lights up with the below pattern in a cycle
   Green => Blue => Red => Purple => Yellow => Light Blue => 6 color cycle => OFF
7. Source button – Press once to turn from Bluetooth mode to LINE IN mode
8. LINE IN RCA jacks
9. Power switch

Troubleshooting Bluetooth connections

Can’t connect for the first time

1. Turn off the speaker completely, and then turn it on the speaker. Follow the above manual on Bluetooth Connection for 1st time connection.

Can’t connect when returning to the speaker system

1. If the system does not automatically reconnect with your Bluetooth-enabled device, you may need to physically go to your device’s Bluetooth settings and manually select “CA 2.1 BT SPEAKER” again to reconnect.
2. You may also try going to your device’s Bluetooth settings and selecting “Forget this device” to remove the speaker system from the list. You may need to turn off the Bluetooth function on your devices to fully clear the list. Then see the steps above by following the Bluetooth Connection for 1st time connection.
3. Check to see if any other devices are already connected to the system. The first indication for this is that the speaker LED status light will show solid Blue. The speaker can only pair with one device at a time. Go to that source device to disconnect from the system first. Then you can follow the above steps for 1st time Bluetooth.

Connection.
Audio is choppy or keeps disconnecting

1. Be sure to check your room environment. Bluetooth technology has a range limit of approximately 30 feet – line of sight. This generally means your best results will be limiting your source device and speakers to the same room. Extremely large rooms, or rooms with a lot of wireless electronics, wi-fi routers, etc., may affect the quality of sound, connection or connection consistency.
2. Check for obstructions, walls, too many people, or other objects that might impede the Bluetooth signal.
3. Try returning the Bluetooth source device to a closer proximity to your speakers.

Troubleshooting

The speaker system will not power on.

• The power button is not turned on. Press and check for the blue LED indicator light to come on.
• Verify that the AC power cord is securely plugged into the wall outlet.
• Check if the wall outlet, or power strip (if used), is actually getting power, i.e. not a switched outlet.

The speaker does not produce sound.

• Verify the speaker is getting power. Check the above steps.
• Make sure the volume is turned up to an audible listening level.
• Verify that all cables are plugged into the correct jacks.
• Often, the issue is not with the speaker but the sound source. The most common is connecting to a computer using an incorrect port/jack. Double-check check the speakers are connected to the audio output jack from your computer. Often, this jack will be green. Also, make sure the media source volume settings are turned up and not set on mute.
• If you’re still having problems, disconnect the speaker source cable and connect to a smartphone, iPod, ot anything with a 3.5mm headphone output. If your speakers work, you know the speakers are functioning correctly a nd the issue likely lies with the computer or other source connections. Sound is distorted.
• Turn the volume down by 25% or 50%. If this does not work, also check the audio source volume level and decrease there if necessary.
• Adjust the computer’s master volume control by balancing the volume until it’s at 50%, then adjust the volume levels on the speakers.

FOR MORE MANUALS BY CYBER ACOUSTICS, VISIT MANUALSLIBRARYY

Cyber Acoustics CA-SP34BT Bluetooth Speakers-FAQ’s