BUNN 55200 CSB3T Speed Brew Coffee Maker Owners Manual

BUNN 55200 CSB3T Speed Brew Coffee Maker

GETTING STARTED

Record the model and date code before using. The model and date code are located on the bottom of your coffee maker.
MODEL: (GRX, BX, SBS, CSB1, CSB2, BTX or CSB3T)
DATE CODE: —————–
Register your product: [https://retail.bunn.com/support/product-registration](https://retail.bunn.com/support/product-registration) Questions? Go to: [https://retail.bunn.com/support/support-request] (https://retail.bunn.com/support/support-request) or call customer service at 1-800-352-2866 (USA) or 1-800-263-2256 (Canada). Please have your model and date code ready when calling for service.

COFFEE MAKER FEATURES

• Brew Funnel
• Lid, Internal Hot Water Tank
• Drip-Free Glass Carafe
• Carafe Lid, Warmer Plate
• Sprayhead
• Warmer Switch
• Tank Power Switch
• Pour-In Bowl
• Thermal Carafe
• Thermal Carafe Lid
• Base
• Top Cover.

SAFEGUARDING

IMPORTANT: Follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• READ ALL THE INSTRUCTIONS IN THIS MANUAL.
• Use caution. This coffee maker produces hot liquids, hot liquids can burn you.
• Place and use coffee maker on a level surface.
• Do not touch hot surfaces. Use handles.
• Do not tip the coffee maker.
• To protect against electric shock, do not place cord, plugs, or coffee maker in water or other liquids.
• Close supervision is necessary when coffee maker is used around children.
• Internal hot water tank contains hot water. Before removing or replacing parts, press power switch off, unplug coffee maker, and let it cool (up to 2 hours).
• Do not operate coffee maker with a damaged cord or plug, or any other malfunction or damage. Using an accessory not evaluated for use with this coffee maker may cause injury.
• Use coffee maker indoors only.
• Do not let cord hang over edge of table or counter.
• Do not place coffee maker in or near a hot gas or electric burner, in a heated oven, or in any other heated area.
• Do not use carafe on a range top or in a microwave.
• Do not use coffee maker for any purpose other than its intended use.
• Do not remove brew funnel or carafe while brewing.
• Do not set a hot carafe on a cold surface.
• Do not use a cracked carafe or a carafe with a loose or weakened handle.
• Do not pour any liquid into the internal hot water tank other than water or vinegar for cleaning, as specified in this manual.
• Do not clean carafe with cleansers, steel wool pads, or other abrasive materials.
• When the coffee maker is not in use, keep lid in the closed position.
• To disconnect, turn any control to the OFF position, then unplug from wall outlet.

INITIAL SETUP

1. Slide the empty brew funnel into funnel rails.
2. Fill the carafe with water. Pour water into the coffee maker. NOTE: Keep lid open.
3. Place carafe under funnel. Close lid. Wait 4 minutes while internal tank partially fills.
4. Repeat steps 2 and 3, until water flows from the funnel.
5. Plug in coffee maker.
6. Press power switch located on the side. (I = ON, O = OFF). Wait 15 minutes for water in tank to heat.

HAVE A QUESTION? [https://retail.bunn.com/support/products/speed-brew](https://retail.bunn.com/support/products/speed-brew)

HOW TO BREW

1. Place a BUNN® coffee filter into the brew funnel.
2. Scoop ground coffee into the filter.
3. Gently shake the brew funnel to level the grounds.
4. Slide the funnel into the funnel rails.
5. Fill the carafe with water: 20 oz for 4 cups, 50 oz for 10 cups.
6. Open lid and pour water into the coffee maker.
7. Position the carafe on the warmer plate (or on the base for Thermal models).
8. Close the lid.
9. Flip the warmer switch to ON for a glass carafe brewer.
10. Wait 4 minutes for the drip-out to complete.
    NOTE: Your thermal carafe holds coffee hot for about 2 hours. For best results, preheat the carafe by filling it with hot water, let sit for 30 seconds, then empty before beginning to brew.

BASIC CLEANING

FOR SPEED BREW MODELS (Excluding Thermal models):

• Wash the brew funnel and glass carafe after each use.
• Both are top rack dishwasher safe.
  Important: Separate the carafe lid from the carafe when washing in the dishwasher, and use the top shelf only for both the glass and the lid. If washing by hand, use a mild, non-abrasive dish soap.
• Wipe the outside of the coffee maker occasionally, including the area above the brew funnel. NOTE: After wipe down, ensure that the warmer switch is in the OFF position.

FOR THERMAL MODELS

Important: Do not place the thermal unit in the dishwasher. Do not use an abrasive device to clean the carafe, because it will scratch the stainless steel. Occasionally, remove the brew-through valve on the Thermal Carafe lid and clean with mild, non-abrasive detergent. To remove the valve, lift at the edge and pull up. Be sure to clean the passage where the valve is located.

• To remove coffee stains from inside the thermal carafe, place a paper filter in the brew funnel and pour 2 teaspoons of powder dishwasher detergent into the brew funnel.
• Pour one carafe of water into the coffee maker.
• Place the carafe under the funnel and close the lid.
• When the brewing cycle stops, remove the brew funnel and discard the filter.
• Rinse the funnel.
• Allow the carafe to sit for about 15 minutes.
• Use a soft bristled brush to clean the inside and outer rim of the carafe.
• Scrub the carafe pour lip and lid with a soft cloth, warm water, and mild detergent.
• When finished, pour out the solution in the carafe.
• Rinse the carafe and the lid.

CLEANING THE SPRAYHEAD

Cleaning the sprayhead tube removes deposits formed by natural mineral content in your water. The more mineral content in your water, the more you should clean. A good rule of thumb is to clean the sprayhead every 3 months. If you have very hard water, then twice a month may be necessary.You will need: a toothpick, dish soap, and a soft cloth.

• Press the tank power switch to the OFF position, unplug the coffee maker and allow it to cool for at least 30 minutes. NOTE: Water in the reservoir may still be hot. Do not tip the machine.
• Remove the funnel and unscrew the sprayhead, loosening with your fingertips.
• Check the sprayhead holes and clear any deposits with the toothpick.
• Clean the sprayhead with a cloth and dish soap. Rinse with water.
• Reinstall the sprayhead.
• Reinsert the brew funnel.
• Plug in the coffee maker. Press the tank power switch to the ON position.
• Wait 15 minutes for the water in the tank to reach brew temperature.
• Your machine is again ready for brewing.

NOTE: Cleaning the sprayhead tube with a deliming tool removes deposits formed by natural mineral content in your water. The more mineral content in your water, the more you should clean. A good rule of thumb is to clean the machine, sprayhead tube and sprayhead every 3 months. If you have very hard water, then twice a month may be necessary if the brew time slows. See the Troubleshooting section if brew time is too slow.

ROUTINE CLEANING
Routine cleaning of your coffee maker removes mineral deposits in the internal hot water tank and will prolong the life of your coffee maker. You will need: 1 quart (32 oz) of white vinegar, a toothpick, and dish soap.

• Slide the brew funnel into the funnel rails.
• Place the carafe under the funnel.
• Open the lid and pour the vinegar into the coffee maker.
• Close the lid. Empty the carafe when the liquid stops flowing.
• Leave the switch in the ON position and allow the vinegar to sit in the coffee maker for at least 2 hours.
• After at least 2 hours, flip the tank switch to the OFF position and unplug the coffee brewer. Allow it to cool for at least 30 minutes.
• Remove the brew funnel and unscrew the sprayhead. Check the sprayhead holes and clear any deposits with the toothpick.
• Clean the sprayhead with a cloth and dish soap.
• Rinse with water.
• Reinsert the funnel.
• Pour a carafe of fresh water into the coffee maker. Place the carafe under the funnel.
• Close the lid (the water will begin to flush out the vinegar from the internal hot water tank).
• Empty the carafe when the liquid stops flowing.
• Repeat the process of cycling fresh cold water 3 or more times, or until you no longer smell vinegar.
• Remove the funnel and reattach the sprayhead.
• Replace the funnel and place the carafe under the funnel. Plug in the coffee maker. Flip the tank switch to the ON position.
• Allow the water in the tank to reach brewing temperature (which should take about 15 minutes). Your coffee maker is again ready for brewing.

DRAINING THE COFFEE MAKER

WATER IN THE COFFEE MAKER SHOULD BE DRAINED WHEN THE COFFEE MAKER IS

• Transported
• Shipped
• Stored in an unheated location with a chance of freezing
• Not to be used for an extended period of time.

TO DRAIN

1. Flip the tank switch to the OFF position, unplug the coffee maker, and allow it to cool for at least 2 hours.
2. 2Remove the funnel and the sprayhead, loosening with your fingertips.
3. Grasp the back of the coffee maker and turn it upside down over a sink.
4. Continue tipping the coffee maker until the flow from the sprayhead tube and lid stops.
5. Attach the sprayhead and insert funnel into coffee maker.
6. Return the coffee maker to the upright position.

TROUBLESHOOTING

WARRANTY
Bunn-O-Matic Corporation (“BUNN”) warrants the BUNN® Speed Brew Coffee maker, except glass carafe, to be free from defects in materials and workmanship existing at the time of manufacture and appearing within the later of the following warranty periods: a) Three (3) years from the date of original purchase of a NEW Coffee maker with delivery of a valid receipt evidencing such purchase or, in the absence of such a receipt, from the date of manufacture; or b) One (1) year from the date a REPLACEMENT Coffee maker is received by customer, in the case BUNN determined a coffee maker returned within the NEW Coffee maker warranty period required a replacement. c) One (1) year from the date of original purchase for thermal carafes included with a NEW Coffeemaker with delivery of a valid receipt evidencing such purchase or, in the absence of such a receipt, from the date of manufacture.

Glass carafes are excluded. If such a defect appears during the warranty period, we will (at our sole option) replace the defective Coffee maker, provided Coffee maker is returned at the customer’s expense. See page 5 for customer service info. Warranty does not cover claims resulting from misuse, failure to follow instructions on installation, set up and use, use with water having a high mineral content, neglect, use of unauthorized attachments, commercial use, use on a current or voltage other than specified on the Coffee maker, lack of maintenance or cleaning, or unauthorized service during the warranty period on conditions otherwise covered by warranty.

THIS WARRANTY SHALL BE EXCLUSIVE AND SHALL BE IN LIEU OF ANY OTHER WARRANTY, WRITTEN, ORAL, OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In any event, the duration of any warranties implied by law, including but not limited to any implied warranties of merchantability or fitness for a particular purpose, is expressly limited to the duration of this limited warranty. Some states do not allow time limitations on implied warranties, so the above limitation may not apply to you.

THE CUSTOMER’S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR OF ANY IMPLIED WARRANTY, OR OF ANY OTHER OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE, SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR OR REPLACEMENT, AT OUR SOLE OPTION. IN ANY EVENT, RESPONSIBILITY FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES IS EXPRESSLY EXCLUDED. Some states do not allow limitation or exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights; you may have other rights, which vary from state to state.

For More Manuals By BUNN, Visit ManualsLibraryy.

BUNN 55200 CSB3T Speed Brew Coffee Maker-FAQs