Acoustic Research ARTW30BK Duo Wireless Speaker and Earbuds
Charge the speaker and earbuds.
Open the door on the back of the speaker and place the earbuds inside their charging
compartments as shown below. Then close the door.
Insert the provided charging cable into the charging jack on the side of the speaker. Plug the other end of the charging cable into a USB power source (like a computer or a USB charger).
The indicator light next to the ON/OFF switch flashes red while the speaker is charging
and turns solid red when the speaker is fully charged. Each earbud’s indicator light turns solid red when the earbuds are charging. The light turns off when each earbud is charged.
Pair the earbuds with your phone.e
To turn on the earbuds: Open the speaker door and take the earbuds out. The earbuds
automatically turn on. The earbud indicator lights flash red and blue, and the earbuds
announce “Power on.” Enable Bluetooth on your smartphone or other device. Choose E5 from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.) The earbuds announce “Connected” when the process is complete.
Pair the speaker with your phone.
To turn on the speaker: Put the ON/OFF switch on the side of the speaker in the ON
position. If you haven’t already paired a device with the speaker, the indicator light next to the ON/OFF switch starts flashing blue—this means the speaker is ready to pair.
Enable Bluetooth on your smartphone or other device. Choose BT01 from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.) The indicator light next to the ON/OFF switch turns solid blue when the speaker is connected to your phone
Using the earbuds and speaker
Using the earbuds
- To turn the earbuds on/off manually: Press and hold the back of either earbud until you hear the “power on” or “power off” prompt.
- To answer or end a phone call: Press the back of either earbud.
- To decline a phone call: Press and hold the back of either earbud for 2 seconds.
- To play/pause music: Press the back of either earbud.
- To go to the next song: Double-press the back of the right earbud.
- To go to the previous song: Double-press the back of the left earbud.
- To use your phone’s voice assistant: Triple-press the back of either earbud.
To reset the earbuds to their factory settings: Make sure the earbuds are not
connected to your phone or other Bluetooth device (you might need to turn your phone’s
Bluetooth off temporarily. Then press the back of either earbud five times to reset. The earbuds beep four times. Follow the instructions in step 2 to pair the earbuds with your phone again.
Charging and storing your earbuds
The earbuds beep continuously when they need to be recharged.
To recharge the earbuds: Open the door on the back of the speaker and put the earbuds back in their charging compartments. They turn off automatically when you put them in their charging compartments.
Tour of the earbuds and speaker
FOR MORE MANUALS BY Acoustic Research, VISIT MANUALSLIBRARYY
Acoustic Research ARTW30BK Duo Wireless Speaker and Earbuds-FAQs
Q1. How do I pair the ARTW30BK speaker with my phone?
Turn on the speaker, hold the Pair button until you hear a tone, then select “AR Speaker” from your phone’s Bluetooth list.
Q2. How do I connect the earbuds?
Press and hold the multifunction button on the earbuds until the LED flashes, then choose “AR Earbuds” from your device’s Bluetooth menu.
Q3. Can the speaker and earbuds be used separately?
Yes. The speaker and earbuds can be paired and used independently with Bluetooth devices.
Q4. What is the Bluetooth range of the ARTW30BK?
It works best within 33 feet (10 meters) from your device without obstructions.
Q5. How long does the battery last on a full charge?
Both the speaker and earbuds provide up to 6 hours of playtime at moderate volume.
Q6. How do I reset the speaker if it won’t connect?
Press and hold Volume + and – together for 6 seconds until the speaker powers off. Remove it from your device’s Bluetooth list, then re-pair.
Q7. How can I reset the earbuds?
Place both earbuds in the charging case, then press and hold the touch controls for a few seconds until the LED blinks, indicating reset mode.
Q8. How do I know when the battery is fully charged?
The charging LED changes from blinking to solid light once fully charged.
Q9. Can I use the ARTW30BK for calls?
Yes. The built-in microphone allows hands-free calling when connected to a smartphone.