Altec Lansing IMW579 Boom Jacket 2
- Make sure the following items are included in your package.
- View the graphic below for a look at the various buttons on your speaker
- Connect the included USB Cable to the included AC Adapter in order to charge your speaker’s internal battery. A full charge takes approximately 4 hours.
Charging: When charging, an orange LED light will illuminate. The orange light will turn off when your unit is fully charged. - Pairing Your Speaker with a Bluetooth Device
- Pairing the Boom Jacket II Speaker with a Bluetooth Device for the First Time When you power on your Boom Jacket II speaker for the first time, it will automatically go into pairing mode. The LED status light will flash rapidly as your speaker searches for a Bluetooth audio source to pair with.
- Once you have successfully paired your speaker with a Bluetooth audio source, the LED status light will stop flashing rapidly, and begin shining steadily while remaining blue. In addition, your speaker will emit an audible tone to confirm that the pairing was successful.
- Pairing Additional Bluetooth Devices to the Boom Jacket II Speaker By pressing the Bluetooth Button ( ) your speaker will again go into pairing mode. The LED status light will flash rapidly, as your speaker searches for another Bluetooth audio source to pair with.
- * Pairing mode times out in 3 minutes.
- Pair the Speaker Using the NFC
With Near Field Communication (NFC), you can easily pair and connect your speaker to your compatible device. Just hold your NFC-enabled device directly against the wireless check-in spot on your speaker.- Power on your speaker. Go to the Bluetooth Manager of your Bluetooth device. Search Bluetooth devices and select “BOOM JACKET 2” to start connecting.
- Power on your speaker. Go to the Bluetooth Manager of your Bluetooth device. Search Bluetooth devices and select “BOOM JACKET 2” to start connecting.
- By downloading the “ALTEC CONNECT” app (for iOS and Android)
- you can personalize your BOOM JACKET II speaker.
- ALTEC CONNECT will allow you to:
- Enable the Multi Connection setting
- Monitor the battery level and charging status
- Control Play/Pause/Skip/Volume/Mute
- Get over-the-air software updates for your Boom Jacket II speaker
- Select EQ sound settings
- Using the Stereo Plus Pairing Feature
The Stereo Plus Pairing feature allows you to connect two Boom Jacket II speakers together
for a bigger, more powerful sound. The Stereo Plus Pairing feature can be accessed through the Altec Connect app, but you can also use it without the app. To do so, follow the steps below:- Have one Boom Jacket II speaker turned on, paired, and playing music.
- Power on your second Boom Jacket II speaker.
- Press and hold the Bluetooth buttons on both speakers at the same time for two seconds. The two connected speakers will now play the same music from the same device.
- You can also use the included 3.5mm Auxiliary Cable to connect audio devices through the AUX In port on your speaker.
NOTE: If the product is exposed to salt water we recommend that you rinse it off with tap water to maintain the proper long-term performance of your product
Charging a Smartphone or Other Electronic Devices
The Boom Jacket II can be used to charge most smartphones and other electronic devices that plug into a USB port for charging. Plug one end of your device’s charging cable into your device and plug the other end into the USB Out port on the you Boom Jacket II (you will need to open the waterproof cover). The Boom Jacket II does not need to be plugged into a power outlet in order to charge your electronic devices, however, its battery life will decrease until the next time you recharge it.
Altec Lansing One-Year Warranty Card
This warranty covers the original consumer purchaser only and is not transferable. This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification, or accident. To Obtain Warranty Service and Troubleshooting information:
Call 1-855-292-4087 or Visit our website at www.alteclansing.com.
To receive a Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON THE DISTRIBUTOR.
REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE – AT THE DISTRIBUTOR’S SOLE DISCRETION -ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. IN NO EVENT WILL THE DISTRIBUTOR, ITS MANUFACTURERS, OR SAKAR INT. BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. NOTWITHSTANDING THE FOREGOING, THE CONSUMER’S RECOVERY AGAINST THE DISTRIBUTOR SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY THE DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.
Some countries, states, or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies. This product is manufactured, distributed, and sold by SAKAR International, Inc. All other trademarks are the property of the respective owner, who has not sponsored, endorsed, or approved this product.
For more manuals about Altec Lansing, visit ManualsLibraryy
Altec Lansing IMW579 Boom Jacket 2-FAQs
Why does my Altec Lansing speaker keep turning off?
If your speaker works while plugged in but turns off when unplugged, the battery may be faulty and need replacing.
Why does my speaker automatically turn off?
The speaker is designed to automatically power off after 1 hour of inactivity when not connected to AC power to conserve battery life.
What is the battery life of an Altec Lansing speaker?
The Altec Lansing LifeJacket Jolt offers up to 30 hours of battery life, allowing you to enjoy your music without worrying about running out of power.
Does Altec Lansing have an app?
Yes, Altec Lansing has the Just Listen™ app, which enhances the experience by offering product registration, detailed product information, and other features.
How do automatic inflation life jackets work?
An automatic inflation life jacket activates when it comes in contact with water. The yellow bobbin senses water, triggering the CO2 cylinder to inflate the jacket within seconds.
Can I use my Altec Lansing speaker while charging?
It is not recommended to use your Altec Lansing speaker while charging as it may damage the device. Always wait until the speaker is fully charged before use.
What does the green light mean on my Altec Lansing speaker?
A green light on the speaker indicates it is in “House Party” pairing mode, ready to be connected to other speakers.
Why isn’t my Altec Lansing LifeJacket speaker charging?
If your speaker isn’t charging, the issue may be with the charging port or cable. Try a different cable or power source. If it still doesn’t charge, you may need to replace the charging port.
Why do my speakers suddenly stop working?
Loose or damaged cables are a common cause for speakers to stop working. Check all cables for damage or disconnections to ensure a stable audio signal.