Bonavita BV1901GW 8-Cup One-Touch Thermal Carafe Coffee Brewer User Guide

Bonavita BV1901GW 8-Cup One-Touch Thermal Carafe Coffee Brewer

IMPORTANT SAFEGUARDS

This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other injuries and damage. Read these operating and safety instructions carefully. Call our toll-free customer service number for information on examination, repair, and adjustments; do not attempt to repair the appliance yourself.

Read all instructions.

• Do not touch hot surfaces – use the handles or knobs.
• Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• If children are present while the appliance is in use, keep them a safe distance away.
• The use of accessory attachments is not recommended by the appliance manufacturer and may result in fire, electrical shock, or personal injury.
• Do not use outdoors or in damp areas.
• Do not let the cord hang over the edge of a table or counter.
• Do not place the appliance on or near a hot electric or gas burner, or in a heated oven.
• To disconnect the appliance, first turn the power switch off, then remove the plug from the wall outlet.
• Remove the carafe’s lid before brewing.
• Do not use this appliance for anything other than its intended use.
• Place the appliance on a flat, level surface.
• Do not attempt to operate the appliance without putting water in the tank. Only fresh, cold water should be used in the tank. Do not use hot water.
• Never remove the carafe or filter basket during the brewing cycle.
• Never move the coffee brewer during the brewing cycle.
• Do not use a carafe with a loose or damaged handle.
• Do not set a hot container on a wet or cold surface.
• If the carafe sustains an impact, it may be damaged. Check for cracks, damage, or signs of leakage before using.
• Do not clean the carafe with abrasive cleansers, steel wool pads, or other abrasive material.
• Do not remove the bottom cover from the appliance. There are no user-serviceable parts inside.
• The carafe is designed for use with this appliance. It must never be used on a range top.
• Make sure that the voltage in your home corresponds with the voltage indicated on the bottom of the appliance.
• Do not attempt to operate the appliance if it only works intermittently or stops working altogether.
• To protect against electric shock, do not place the cord, plugs, or appliance in water or other liquids.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the appliance to an authorized service facility for examination, repair, or adjustment.
• Scalding may occur if the lid is removed during the brewing cycles.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard.

SAVE THESE INSTRUCTIONS

EXTENSION CORDS

A short power-supply cord is provided to reduce the risk of tangling and tripping. Longer detachable power-supply cords or extension cords may be used if care is exercised. If a detachable power-supply cord or extension cord is used:

• The electrical rating of the extension cord should be appropriate for the electrical rating of the appliance.
• The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be tripped over, snagged, or pulled on, especially if children are present.

POLARIZED PLUG

This appliance has a polarized plug, which means that one blade is wider than the other. To reduce the risk of electric shock, this plug is designed to fit into a polarized outlet only one way. If the plug does not fully fit into the outlet, reverse it.

If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug.

Product Features

1. Water tank lid
2. Brewer lid
3. Water level indicator
4. On/off switch
5. Filter basket
6. Carafe lid
7. Glass carafe
8. Warming plate

Brewer Set-Up

BEFORE FIRST USE

1. Remove packaging materials, labels, and stickers from the coffee brewer.
2. Clean the appliance by filling the water tank with clear, cold water to the maximum level mark. Place the filter basket on top of the glass carafe. Then, place the carafe with the lid removed onto the warming plate. Turn the coffee brewer on to allow the water to run through.
3. Let the appliance cool down for 5 minutes before repeating the process. Brew only water through the coffee brewer at least 2 times before brewing any coffee.

Brewing Instructions

1. Remove the glass carafe and filter basket from the warming plate.
2. Raise the lid of the water tank and pour 4-8 cups of fresh cold water into the tank (Fig. 1). Do not fill above the MAX fill line.
3. Place a basket-style paper filter in the filter basket. We recommend a basket filter with a 3 1/4” base dimension. Scoop ground coffee into the filter. We recommend two levels of tbsp. of drip grind coffee per cup, varying the amount according to your taste (Fig. 2). This equates to approximately 7 to 9 grams of coffee per cup.
4. Remove the carafe lid. Place the filter basket with coffee into the glass carafe. Then place the carafe onto the warming plate. Switch the appliance on. The on/off switch will light up to show that the machine is operating (Fig. 3).
5. After the brewing process ends, a beep will be heard once the cycle is complete. Remove the coffee-filled carafe from the appliance. To dispose of the used filter and coffee grounds, we recommend dumping them from the filter basket. Rinse the filter basket out and set it aside to dry.
6. To pour and for maximum heat retention, place the lid on the carafe shortly after the brew cycle is complete. (Fig. 4).
7. The light on the power button will remain on until the hot plate automatically shuts off after 40 minutes.
8. The appliance is equipped with an automatic shut-off function, which triggers when the brew cycle is complete. The appliance can be switched off manually at any time by using the on/off switch.

Optional Instructions for Pre-Infusion Mode:

Freshly roasted coffee has more CO2 trapped in the bean. If you are brewing with freshly roasted coffee, or you would like to pre-infuse the coffee, press and hold the power switch for 5 seconds. At that point, the power switch light will flash, and 2 beeps will be heard, indicating that you’ve enabled the pre-infusion mode. Press and release the power switch a second time to begin brewing. You can disable the pre-infusion mode by pressing the power switch until the light blinks (5 sec.) and a single beep is heard. The brewer will remain in this mode until the mode is turned off or the brewer is unplugged.

Brewing a Better Cup

Bonavita brewers are expertly engineered to take the guesswork out of brewing the perfect cup of coffee and produce exceptional, consistent results with every use. Our easy-to-use brewers keep things simple, with great coffee at the push of a single button. Following are a few tips to help you brew an amazing cup of coffee with your new Bonavita brewer:

COFFEE QUALITY, FRESHNESS, AND GRIND

The quality of the coffee has a great impact on brewed coffee. Using freshly roasted coffee and grinding the beans just before brewing are important considerations. We recommend using coffee that was roasted in the last 30 days for the best flavor. In addition, we encourage the use of an air-tight container or sealed bag stored in a dark cabinet to help extend your coffee’s lifespan.

Grinding coffee significantly speeds up the time at which coffee starts to lose its flavor. Once coffee is ground, the air begins to attack essential oils and other volatile flavor components. It’s only a matter of hours before most of the ground coffee’s aroma has evaporated. While we encourage grinding your coffee immediately before brewing whenever possible, we know that there are times when pre-grinding can’t be avoided.

Whether you are purchasing pre-ground coffee or grinding it just before you brew, we recommend using coffee that is ground to a medium/coarse setting, similar to coarse ground salt.

COFFEE TO WATER RATIO

Applying the same ratio of water to coffee grounds each time you brew will result in a more consistent cup of coffee. Using a scale to weigh your coffee is the best way to stay consistent, but we understand that might not always be possible. We also recommend brewing in 6 or 8-cup batches. In the case of Bonavita brewers, 1 cup is equal to 5oz.

Brewing time is approximately 6 minutes for 8 cups of coffee. This will allow for proper water flow and saturation time of the coffee grounds.

BREWING WATER AND TEMPERATURE

An average cup of coffee is over 98% water. Simply put, the water you use to brew your coffee will affect the flavor of your coffee. So, we highly recommend brewing with fresh, filtered water whenever possible.

Additionally, tap water and its mineral content vary by region of the country. Using filtered water will help to minimize the scale build-up in your brewer, which will help your brewer perform at its best.

The coffee industry’s standard for the temperature of the brewing water is 198°F- 205°F (92°-96°C). This coffee brewer is specially engineered to heat the water to precisely this range.

Cleaning and Maintenance

This manual includes some helpful guidance for maintaining your brewer over time to ensure consistent performance and flavorful beverages. The brewer contains no internal user serviceable parts, and it’s best to leave servicing and repairs to the experts at [email protected]

Proper care will ensure years of service from this coffee brewer. Aside from keeping the brewer clean and descaling when necessary, there is no user maintenance required.

This appliance contains no internal user-serviceable parts. Leave servicing and repairs to qualified personnel.

Use a soft, damp cloth and a mild dish cleaning liquid for cleaning the carafe and the housing. Make sure to rinse thoroughly.

The filter basket, brewer lid and glass carafe, and carafe lid may be cleaned on the top rack of the dishwasher.

CLEANING THE BREWER LID AND SHOWER HEAD:

Always unplug the coffee brewer before cleaning. The brewer lid with built-in shower head is removable and can be cleaned on the top rack of the dishwasher.

1. Carefully pull the front edge of the brewer lid to remove.
2. Clean.
3. Reinstall the lid.

DESCALING

In hard-water areas, scale from the limestone content in the water may build up in your machine. Scaling can lead to extended preparation time and possible damage to your coffee brewer. We suggest that you descale your brewer after every 60 brew cycles, or once every two months. However, if the appliance makes an unusually loud noise, delays brew time, or fails to achieve the proper water temperature of 198º-205ºF (92°-96°C), you may need to descale more often. We recommend periodically using a good-quality biodegradable and phosphate-free coffee machine descaler. One is designed to break down mineral build-up inside your brewer to ensure great coffee and consistent functionality. Vinegar may not effectively descale your brewer, and can be difficult to rinse thoroughly. Vinegar may also leave behind an odor that can impact the flavor of your coffee.

Brewer Troubleshooting

For other tips and answers to frequently asked questions, please visit BonavitaWorld.com/Brewer-FAQ

For more Manuals by Bonavita, visit ManualsLibraryy

Bonavita BV1901GW 8-Cup One-Touch Thermal Carafe Coffee Brewer-FAQs