Ingenuity InLighten Landry the Lion 5-Speed Baby Swing Manual

Ingenuity InLighten Landry the Lion 5-Speed Baby Swing

IMPORTANT

• The provided USB cord is 183cm in length
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib

Care and Cleaning

• Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
• Headrest – Fasten all hook-and-loop patches. Machine wash with cold water, gentle cycle. No bleach. Air dry flat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
• Storage – When putting swing away for storage, always store in a dry location, away from any heat sources, and out of the sun.

Not Included

Using the Seat Restraint

Audio Input

• When the product is connected to a music player, ensure that the volume of the music player is set to a low value.

Using the Recline Function

Using the Swing Control Module

Storage and Travel

• Slide the Power switch to power the Swing Control Module

• The Speed Selector function provides 6 speed settings and OFF. The LEDs operate sequentially and in bar graph mode. To start the swing function, press the button until the flashing LED bar graph displays the desired setting. Then gently push the seat (within 15 seconds) to activate the swing motion. After five seconds a single LED will indicate the selected speed. When you change the speed setting during swing motion, the LED bar graph will flash for five seconds during the speed adjustment. When the swing timer expires, the swing stops and the Speed Selector and Timer LEDs turn OFF.
• Use the Swing Timer Select function to turn OFF the swing automatically. Press the button to sequence to the desired timer setting of 30, 45, or 60 minutes. The three LEDs above the button indicate the selected time period. If you do not select a timer setting (all LEDs are OFF), the unit uses a default time of 90 minutes for auto-shutoff. To use the swing function after auto-shutoff, either OK, press the Swing Timer Select button or the Speed Selector button.
• Press the Nature Sounds/Music button to begin music and nature sounds playback. Press as needed to select the desired natural sound or song. Auto-shutoff occurs after about 20 minutes.
• Push the Volume Control switch as needed to turn off or adjust the volume for music and nature sounds. When the product is connected to a music player, ensure that the volume on the music player is set to a low volume.
• Press the Mobile Motion button to start the mobile.
• Press the Lights button to switch on the lights. Press it again to get into a random light/play pattern

For more manuals by Ingenuity, visit ManualsLibraryy

Ingenuity InLighten Landry the Lion 5-Speed Baby Swing-FAQs