JBL Charge 3 Bluetooth Speaker
What’s in the box
Buttons
Quick Start Guide
Connections
Bluetooth®
Hands-free
JBL Connect
Wirelessly links multiple JBL Connect-compatible speakers together
Press the JBL Connect button on all desired speakers to begin pairing. All connected speakers will play the same music from the same device.
LED Behavior
JBL Charge 3 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Charge 3 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Charge 3 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Charge 3 to water while charging, as doing so may result in permanent damage to the speaker or power source. IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.
EN
- Bluetooth version: 4.1
- Support: A2DP V1.3, AVRCP V1.5, HFP V1.6, HSP V1.2
- Transducers: 2 x 50mm
- Rated power: 2 x 10W
- Frequency response: 65Hz-20kHz
- Signal-to-noise ratio: >80dB
- Battery type: Lithium-ion Polymer (3.7V, 6000mAh)
- Power Supply: 5V / 2.3A
- USB charge out: 5V / 2A (maximum)
- Music play time: up to 20 hours (varies by volume level and content)
- Battery charge time: 4.5 hrs
- Dimensions (W × D × H): 213 x 87 x 88.5 mm
- Weight: 800g
- Bluetooth® transmitter frequency range: 2.402 – 2.480 GHz
- Bluetooth® transmitter power: 0-9 dBm
- Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPS
FOR MORE MANUALS BY JBL, VISIT MANUALSLIBRARYY
JBL Charge 3 Bluetooth Speaker-FAQs
Q1. How do I use a JBL Bluetooth speaker?
Turn on the speaker, enable Bluetooth on your device, pair it with “JBL Charge 3,” and start playing music.
Q2. How do I connect the JBL Charge 3 to my phone?
Press the Bluetooth button on the speaker to enter pairing mode, then select “JBL Charge 3” from your phone’s Bluetooth settings.
Q3. Does the JBL Charge 3 have a microphone?
Yes, it comes with a built-in microphone, allowing hands-free calls directly through the speaker.
Q4. How long does it take to fully charge the JBL Charge 3?
It usually takes about 4–5 hours for a full charge.
Q5. How do I know if my JBL Charge 3 is fully charged?
The battery indicator LEDs stop blinking and stay solid when the speaker is fully charged.
Q6. How can I tell if the battery is failing?
If the speaker doesn’t hold a charge or shuts off unexpectedly, the battery may be worn out and need replacement.
Q7. How do I reset the JBL Charge 3?
Press and hold the Volume Up (+) and Play/Pause buttons together until the speaker turns off. This restores factory settings.
Q8. Can the JBL Charge 3 connect to other speakers?
Yes, it supports JBL Connect, letting you link with other JBL Connect-enabled speakers like Flip 4, Pulse 3, and Xtreme.