Morphy Richards MRCO5SS Electric Can Opener User Manual

Morphy Richards MRCO5SS Electric Can Opener

IMPORTANT SAFETY INSTRUCTIONS

Before using this product, please read and understand this instruction manual carefully, and keep it in a safe place.

• This appliance must be used in accordance with the instructions and must not be used for other purposes.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities or a lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with this appliance.
• In the absence of supervision, the cleaning and maintenance work should not be done by a child.
• To protect against electric shock, do not immerse the appliance in water or other liquid.
• Unplug from the outlet when not in use, or when left unattended, and before assembling, disassembling, or cleaning.
• Use of accessories not recommended or sold by the original manufacturer may cause risks of fire, electric shock, or personal injury.
• This appliance is intended to be used in household and similar applications such as:
•  staff kitchen areas in shops, offices, and other working environments;
• farm houses;
• by clients in hotels, motels, and other residential-type environments;
• bed and breakfast type environments.
• WARNING: The blades are very sharp. Handle with care when using and cleaning.
• WARNING: Make sure the can opener is not loaded before connecting or disconnecting the power supply and is left unattended.
• Do not use accessories or components made by other manufacturers.
• Do not use to open pressurised cans.
•  Do not open cans of flammable liquids such as lighter fluids.
• Avoid touching moving parts. Keep hands, hair, and clothing away from the blade during operation, to prevent personal injury and/or damage to the appliance.

Location

• WARNING: Do not place the appliance on a metal tray or surface whilst in use.
• For indoor use only. Do not use outdoors or near water.
• Ensure the appliance is placed on a firm, flat surface.
• Do not place the appliance on or near hot surfaces such as hot plates, radiant rings, or near naked flames.

Power cord

• To protect against electric shock, do not touch the plug with wet hands or immerse the power cord, plug, or appliance in water or other liquid.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.
• The power cord should reach from the socket to the appliance without straining the connections.
• Remove the plug from the socket, grasp the plug, and pull out the power cord; do not pull on the cord directly.
• Do not let the cord hang over the edge of the table or counter, and keep it away from any hot surfaces.
• Do not let the cord run across an open space, e.g., between a low socket and a table.
• Do not modify or lengthen the power cord of this product in any way.

Personal safety

• WARNING: To protect against the risk of electric shock, NEVER immerse the appliance in water or in any other liquid and always ensure the electrical connections are kept dry.
• Do not operate any appliance with a damaged cord or plug, or after an appliance has malfunctioned, or has been dropped or damaged in any way.
• Unplug from the outlet when not in use and before cleaning. Allow to cool completely before removing or adding parts, and before cleaning the appliance.
• Always unplug when not in use.

Electrical requirements

• WARNING: This appliance should NOT be used with extension leads and/or power boards.
• Check that the voltage on the rating label of your appliance corresponds with your house electricity supply, which must be A.C.

SPECIFICATIONS

PRODUCT OVERVIEW

1. Guide Pin
2. Magnetic Lid Holder
3. Cutting Lever
4. Cutting Blade
5. Drive Wheel
6. Bottle Cap Opener
7. Knife Blade Sharpener
8. Power Cord
9. Power Cord Storage

USING THE CAN OPENER

1. Remove all packaging materials. Do NOT remove the rating label on the back of the appliance.
2. Remove the Can Opener Unit and Cutting Lever from the packaging. The Cutting Lever needs to be attached before first use.
3. To attach the Cutting Lever to the Can Opener Unit, align the lever key tabs with the slots on the unit and press down to secure. See diagram below.
4. Plug the Can Opener into a power outlet.
5. Raise the Cutting Lever and move the can into place so the rim of the can is below the Guide Pin and on top of the Drive Wheel.
6. Lower the Cutting Lever into a horizontal position; the Magnetic Lid Holder will attach to the can lid. NOTE: Make sure the Cutting Blade is inside the rim of the can, and the can opener will start automatically. NOTE: It is not necessary to hold the Cutting Lever down or hold the can while it is being opened. The motor will automatically stop when the can is open.
7. When the can has stopped moving, hold the opened can and lift the Cutting Lever to release the can.

WARNING: Avoid touching the cut edges of the can or lid, as they are sharp. Remove the lid from the Magnetic Lid Holder with care.

IMPORTANT NOTES & TIPS

• The can opener should not be used to open cans with a pull tab, peel-off foil seal, rolling key cans, rimless cans, or angled cornered cans.
• Cans should not be wider than 100 mm and/or taller than 178 mm. If a can weighs more than 500 g, place your hand on top of the Can Opener to avoid overturning.
• No more than 5 cans should be opened continuously. Open a can at an interval of 15 seconds.
• If there is a dent, bump, or heavy seam on the rim of the can, open the other end of the can.
• Clean and dry the blade carefully after use, as the blade is sharp.
• The can opener motor is permanently lubricated and requires no oiling.

USING THE BOTTLE OPENER

1. IMPORTANT: The Can Opener SHOULD NOT be plugged into a power outlet when opening bottles.
2. Unplug the power supply before using the Bottle Opener.
3. Holding the bottle, position the cap under the metal hook in the Metal Cap Bottle Opener. See diagram below.
4. Place one hand on the top of the Can Opener to avoid overturning and pull the bottle downwards with the other hand to remove the cap from the bottle.

NOTE: Only use the bottle opener with metal caps. Do not use for twist-off caps or ring pulls.

USING THE KNIFE SHARPENER

1. IMPORTANT: The Can Opener SHOULD NOT be plugged into a power outlet when sharpening knives.
2. Unplug the power supply before using the Knife Sharpener.
3. Place the knife intended for sharpening in the Knife Blade Sharpener slot at the back of the unit. See diagram below.
4. To sharpen the entire length of the blade, carefully pull the knife backwards through the Knife Blade Sharpener and repeat until the knife has reached the required sharpness.

NOTES:

• Clean and dry knives before sharpening.
• Do not attempt to sharpen serrated blades, as this will smooth the edges.
• Do not attempt to sharpen scissors.
• Always sharpen knives with care to avoid injury.

CARE & CLEANING

• Before cleaning the Can Opener, unplug it from the power outlet.
• To remove the Cutting Lever and Magnetic Lid Holder for easy cleaning, raise the Cutting Lever and pull it out of the Can Opener housing.
• The Cutting Lever and Magnetic Lid Holder can be cleaned with a damp cloth and then dried thoroughly.
• Wipe the Can Opener unit and the area around the Drive Wheel with a damp cloth or sponge.
• To replace the Cutting Lever, align the tabs with the slots and push it into the Can Opener unit, then press down on the Cutting Lever to secure it in place.
• The power cord can be stored conveniently in the Power Cord Storage cavity in the back of the Can Opener.
• To avoid damaging the Can Opener, do not use abrasive cleaners or scouring pads.

TROUBLESHOOTING

REGISTER YOUR PRODUCT

By having your product registered on the Morphy Richards customer portal, your details can be accessed quickly in the event that there is an issue with your product. Make it quick and easy to get the help you need, if you ever need it. For product hints and tips plus more join us at www.morphyrichards.com.au.

WARRANTY

Please refer to the warranty card in the box for warranty information. For any troubleshooting advice, please contact the relevant Customer Care Centre below.

Glen Dimplex Australia Pty Ltd
8 Lakeview Drive, Scoresby 3179, Victoria
Australia
Ph: 1300 556 816

Glen Dimplex New Zealand Ltd
38 Harris Road, East Tamaki, Auckland 2013
New Zealand
Ph: 0800 666 2824

For More Manuals By Morphy Richards, Visit ManualsLibraryy.

Morphy Richards MRCO5SS Electric Can Opener-FAQs