Ninja CFP101 DualBrew Hot & Iced Coffee Maker
IMPORTANT: Ensure you prime your coffee maker before your first brew.
TO PRIME YOUR COFFEE MAKER:
- Plug it into an outlet and turn it on.
- Fill the water reservoir to the FULL line with fresh water and place it on the base.
- Place the empty carafe under the brew basket and run a water-only Full Carafe, Classic brew.
- Once the brew is complete, discard the water; the coffee maker is now primed for use.
NOTE: If using the brewer in a high-altitude area, running a calibration brew is required. Not running a high-altitude calibration brew in a high-altitude area will result in excessive steaming during brewing. Refer to page 4 of the Owner’s Guide for instructions on running a high-altitude calibration brew.
WHAT’S IN THE BOX
- NINJA DUALBREW HOT & ICED COFFEE MAKER
- 12 CUP GLASS CARAFE
- 60 OZ. REMOVABLE WATER RESERVOIR
- BREW BASKET
Comes fully installed in the brewer. It must always be inserted when brewing pods or grounds.
- NINJA POD ADAPTER
Used only for brewing pods. Always insert it over the brew basket when brewing pods.
- NINJA GROUNDS ADAPTER
Comes fully installed in the brewer. Used only for brewing ground coffee. Always insert it over the brew basket when brewing grounds.
- PAPER FILTER KIT
- ADAPTER STORAGE
Can be installed on the back of the unit to store either the Ninja Pod or Ninja Grounds Adapter.
- NINJA SMART SCOOP™
Use this to measure coffee grounds.
HOW TO BREW
CHOOSE A METHOD
Use the Ninja Grounds Adapter
Use the Ninja Pod Adapter
CHOOSE A SIZE
Use the Multi-Serve arrow buttons to select the brew size. Place the empty vessel or carafe under the brew basket.
SELECT A BREW
Press either the CLASSIC, RICH, or OVER ICE brew style to start your brew. There will be an illuminating progress bar on the display to track the progress of your brew. THE BREW MAY PAUSE ONCE OR MULTIPLE TIMES DURING THE BREW CYCLE. THIS IS NORMAL. Pausing allows the coffee grounds to fully extract and unlock the full flavor of the brew style.
PREPARING YOUR BREW
NINJA POD ADAPTER
For brewing pods.
- Remove the Ninja Grounds Adapter from the lid and ensure there is no filter in the brew basket.
- Place the Ninja Pod Adapter over the brew basket and ensure it is aligned with the brew basket handle.
- Place a pod in the Ninja Pod Adapter and close the coffee maker lid firmly to pierce the pod.
NINJA GROUNDS ADAPTER
For brewing grounds.
- 1 Place a #4 cone paper filter or permanent filter (sold seperately) in the brew basket
- Use the Ninja Smart Scoop to fill the filter.
- Place the Ninja Grounds Adapter over the brew basket and ensure it is aligned with the brew basket handle. Close the coffee maker lid.
INSTALLING THE ADAPTER STORAGE
ADAPTER STORAGE
- Securely fit the Adapter Storage pins into the holes on the back of the coffee maker.
- Store either the Ninja Pod or Ninja Grounds Adapter in the Adapter Storage.
For how-to videos and more, visit ninjakitchen.com
For more manuals by Ninja, visit ManualsLibraryy