RadioShack 2733350 Cell Phone Stand Wireless Charger
INSTRUCTIONS FOR USE
- Plug the power adapter into the socket. One section of the USB power cable is connected to the adapter, and the other is connected to the wireless charger
- Place the mobile device that supports wireless charging on the charging area of the wireless charger
- Remove the mobile device after it is fully charged.
INDICATOR DESCRIPTION
- Power ON: The red and blue light flashes 1 time, and then go off to enter the
stand-by state. - Charging: Steady red warning light
- Foreign object detection: flashes continuously until the product is removed, and the flashing is cancelled.
PRECAUTIONS
- Do not squeeze or hit the object with force
- Do not disassemble or modify it by yourself
- Do not use it near hot or hot objects, and do not use it in high-temperature, humid, or oily environments
- Do not place it too close to magnetic cards (ID cards, bank cards, etc) with magnetic strips or chips to avoid magnetic failure
- Do not place metal or metal phone cases on the wireless charger.
- Do not place metal or metal phone cases on the wireless charger
- Please keep the distance between the implanted medical device (new pacemaker, implantable cochlear, etc.) and the wireless charger at least 20cm to avoid potential interference with the medical device
- Do not shred or pierce this product with metal, do not burn or discard it in water
- Do not short-circuit this product
- Unplug the power supply when the product is not in use, and store it in a dry, well-ventilated location.
PRODUCT PARAMETERS
FOR MORE MANUALS BY RadioShack, VISIT MANUALSLIBRARYY
RadioShack 2733350 Cell Phone Stand Wireless Charger-FAQs
Q1. How does this wireless charging stand work?
It uses electromagnetic induction. The charger’s coil creates a magnetic field, which transfers power to your phone’s built-in receiver coil and charges the battery.
Q2. How do I use the RadioShack wireless charger?
Simply plug the charger into a power source, then place your phone in the center of the stand. The device will start charging automatically.
Q3. How do I know if my phone is charging?
Your phone will show a charging symbol, animation, or notification. The LED indicator on the charger may also light up.
Q4. What should I do if my phone isn’t charging?
Make sure the phone is centered, remove any thick cases, and confirm the charger is connected with the correct adapter.
Q5. Does it stop charging when my phone is full?
Yes. Once your phone reaches 100%, charging stops to prevent overcharging.
Q6. How long does it take to fully charge a phone wirelessly?
On average, it takes about 3–4 hours to charge a phone from 0–100% using a standard 10–15W wireless charger.
Q7. Can all phones use this wireless charger?
Only phones that support Qi wireless charging are compatible. Check your phone’s specifications before use.
Q8. Does wireless charging overheat my phone?
Some heat is normal, but modern phones manage temperature well. For best results, remove thick cases and ensure proper placement on the stand.