Tiksounds BX17 Bluetooth Wireless Earbuds
Before Use
Battery Indicator.
Choose the right angle and ear tips.
Connect
- Open the cover for pairing and close the cover for charging.
- After opening the phone Bluetooth, Click the <BX17> to Pairing.
Reset
If the earbuds have any connection or function problems, please reset the earbuds.
- Delete the BT pairing information on the phone.
- Take the earbuds into the charging case to charge.
- Take out the earbuds and wait for 20 seconds.
(If the above operation does not work, please try again)
Operation
X1: Click Once
X2: Click 2 times
Timer 2S: Press and hold for 2 seconds
Problem handling
- Can be connected but there is no sound: Click the earbud volume key to increase the volume.
- One of the earbuds cannot be charged: Clean the charging contact of the earbuds and the charging case.
- If one of the earbuds cannot be connected: Reset the earbuds.
If the earbuds cannot be charged, please activate the warranty and contact us to send a new product.
Please clean the charging contacts of the earbuds and charging case to avoid charging failures.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For more Manuals by TikSounds, visit ManualsLibraryy
Tiksounds BX17 Bluetooth Wireless Earbuds-FAQs
How do I connect the Tiksounds BX17 earbuds via Bluetooth?
Turn on Bluetooth on your device. Put the earbuds into pairing mode by pressing and holding the button until the LED flashes or you hear a pairing sound. Then select “BX17” from the list of available devices.
Do Bluetooth earbuds require Wi-Fi to work?
No, Bluetooth does not need Wi-Fi. They use separate technologies. You can connect your earbuds to devices without any internet connection.
How do I turn off the BX17 earbuds manually?
Press and hold the power button (usually on the side or touch surface) for a few seconds until the earbuds power off.
How do I clean my wireless earbuds properly?
Use a lint-free cloth slightly dampened with water to gently wipe the exterior. Avoid getting moisture into any openings. Detachable parts can be cleaned with mild soap and water.
Do Tiksounds BX17 earbuds need to be charged regularly?
Yes. It’s a good idea to charge them when the battery runs low or charge overnight so they’re always ready for use.
How can I tell if my earbuds are good quality?
Good earbuds deliver clear, well-balanced audio with no distortion, even at high volumes. They should also be comfortable and have a secure fit.
Can water damage my BX17 earbuds?
Yes, if the earbuds are not water-resistant, exposure to moisture can damage the internal components. Always check the IP rating before using them near water.
Are the BX17 earbuds waterproof?
Check the packaging or product specs for the IPX rating. For full waterproofing, a rating of IPX7 or higher is recommended. Lower ratings may only protect against sweat or light rain.
Are all wireless earbuds waterproof?
No. Only earbuds with an IPX waterproof rating offer protection against water. Not all wireless earbuds are water-resistant, so it’s important to verify before use in wet conditions.