TRIBIT MoveBuds H1 BTH95 Earbud
Package Contents
Power ON / Power OFF
Bluetooth Connection Instructions
Setting up your MoveBuds H1 for the first time
Turn on the MoveBuds H1, activate the Bluetooth function on your desired device, and search for other Bluetooth-enabled devices. Find the device name “Tribit MoveBuds H1” to initiate the connection.
Future usage with the MoveBuds H1
Once paired, the MoveBuds H1 will automatically connect to the last connected device when turned on.
Connecting the MoveBuds H1 with other devices
Method 1
Disconnect the currently connected Bluetooth device, and the MoveBuds H1 will automatically return to Bluetooth pairing mode.
Method 2
Place the MoveBuds H1 back into the charging case. Hold down the button on the charging case for five seconds until its indicators flash three times. The MoveBuds H1 will be ready to pair with a new device when removed from the case.
Wearing Your MoveBuds H1
The left earbud is placed on the right side of the charging case, while the right earbud is placed on its left side. Ensure you are putting the correct earbud into your ear before attempting to wear it.
Replace the Ear Tips
Five pairs of different-sized ear tips are provided to ensure you have the best choice for your ears.
Button Functionality
Left Earbud
- Single-click: Play/pause the music / Answer a call.
- Double-click: Previous track / End a call.
- Click three times: Activate the voice assistant in a non-conversation state.
- Hold down: Decrease the volume / Reject an incoming call.
- Hold down (six seconds): While off, this will turn on the left earbud.
- Hold down (ten seconds): Turn off both earbuds.
Right Earbud
- Single-click: Play/pause the music / Answer a call.
- Double-click: Next track / End a call.
- Click 3 times: Ambient mode.
- Hold down: Increase the volume / Reject an incoming call.
- Hold down (six seconds): While off, this will turn on the right earbud.
- Hold down (ten seconds): Turn off both earbuds.
MoveBuds H1 Indicator Light Instruction
- Power ON/OFF: The white indicator will flash for one second before turning on/off.
- Bluetooth Pairing: The white indicator will flash slowly while in pairing mode.
- Connection Successful: The white indicator will turn off.
- Re-connecting: The white indicator breathes slowly.
- Low Battery: The white indicator flashes rapidly.
Charging Instruction
Charging the MoveBuds H1
Place the MoveBuds H1 back into the charging case and close the cover to start charging. If both the case’s left and right light indicators are on, your MoveBuds H1 are successfully charging.
It takes about 90 minutes for the MoveBuds H1 to fully charge.
Charging the Charging Case
The charging case indicators will breathe during charging, producing a solid glow. The MoveBuds H1 charging case takes 120 minutes to charge fully.
Reset
To reset the MoveBuds H1, place the MoveBuds H1 back into the charging case and hold down the button on the case for ten seconds. The charging case’s lights will flash twice to indicate a successful reset.
Note: After resetting your MoveBuds H1, you must delete the pairing record on your previously connected device and search for earbuds again to reestablish a connection.
Safety Tips
- Do not dismantle or modify the MoveBuds H1 for any reason. The warranty will not cover any resulting malfunction due to modifications.
- The opening and closing edges of the charging case are much sharper than in other positions. Please be careful when you open/close its cover to avoid scratches.
- Do not expose the MoveBuds H1 to temperatures above 45°C or below -20°C, as this may cause damage to your device.
- The MoveBuds H1 contains a built-in lithium battery. Do not disassemble, hit, squee,, e,, or throw MoveBuds H1 into fire as this may cause an explosion.
- The MoveBuds H1 contains small components. Please keep them away from children to avoid accidental swallowing or other injuries.
- It is recommended not to use the MoveBuds H1 when driving, as it is illegal in some regions. Please check and abide by the local laws and regulations on the use of headphones. Please stop listening using the MoveBuds H1 if you are distracted by audio devices when driving or engaging in activities that require complete concentration.
- The MoveBuds H1 and the charging case contain magnets. The magnetic fields generated by these magnets may interfere with pacemakers, defibrillators, or other medical equipment. Please keep a safe distance between your medical equipment and the product.
- The antibacterial agents coating the earbuds have an inhibitory effect on bacteria. However, the earbuds may still cause ear infections if not properly cleaned. Please use a lint-free soft cloth to regularly clean the MoveBuds H1.
CAUTIONS
- The MoveBuds H1 may sound lower than the actual volume in a noisy environment.
- Long-term high-volume listening may cause permanent damage to your hearing.
- Please charge the MoveBuds H1 with the provided charging cable and power adapter/computer. Only use an adapter that complies with your country/region’s laws and international and regional safety standards.
- Using the MoveBuds H1 in dry seasons or regions may easily cause static electricity accumulation. You may feel a small amount of static electricity discharge from the earbuds. Please avoid using it in dry environments to reduce the risk of electrostatic discharge. As an extra safety measure, before using the MoveBuds H1, users may touch a grounded item or an unpainted object to discharge any sstatic electricity
- The waterproofness of the earbuds is tested in the laboratory, which is different from the actual usage conditions. It’s not recommended to immerse the earbuds in water for a long time or wear them for swimming, bathing, or other water sports this may lead to damage to the earbuds, or the warranty will be invalid.
Working Frequency & Transmitting Power
- Working Frequency: 2402MHz ~ 2480MHz
- Transmitting Power: -6 ~ 4dBm
Battery Life and Charging Data Declaration
The MoveBuds H1 battery life, charging time, and charging case come from the ThousandShores Group’s Laboratory. ThousandShores Group reserves the right to adjust, revise, or add stipulations to this user’s manual. Visit our websit,,e,, Tribit.c...
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Qualcomm aptX
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
For more manuals by Tribit, visit ManualsLibraryy
TRIBIT MoveBuds H1 BTH95 Earbud- FAQs
How do I turn on the Tribit MoveBuds H1?
Remove the earbuds from the charging case—they will power on automatically. If not, press and hold the touch area to switch them on manually.
How do I put the MoveBuds H1 in pairing mode?
Take the earbuds out of the case. If they don’t enter pairing mode automatically, press and hold the touch button until the LED indicator flashes.
How do I reset the Tribit MoveBuds H1?
Place both earbuds in the charging case. Press and hold the case button for 10 seconds until the case LEDs flash twice, confirming a successful reset.
How do I factory reset any Tribit earbuds?
Turn off both earbuds. Press and hold the touch areas for about 10 seconds, then double-tap within 5 seconds to enter the reset mode (varies by model).
Why aren’t my earbuds connecting?
Ensure Bluetooth is enabled, forget the earbuds from your phone’s Bluetooth list, restart your device, and try pairing again.
How long does Tribit MoveBuds H1 battery last?
They offer up to 110 hours of total playtime with the charging case.
How do I charge the Tribit MoveBuds H1?
Place the earbuds inside the charging case. Connect the case to a USB-C charger until the indicator lights show charging status.
How do I know if my earbuds are fully charged?
The charging case LEDs stop blinking or change to a solid color once the earbuds and the case are fully charged.