Tzumi 7058 Auto Pairing Wireless Earbuds
IMPORTANT SAFEGUARDS
- Do not use this unit for anything other than its intended use.
- Keep the unit away from the heat source. Direct sunlight. Humidities. Water or another liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the batteries.
- Do not operate the unit If It has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
- Do not use this unit If It has been dropped or damaged in ans1 was1.
- Repairs to the electrical equipment should ononlye preperformedJ a qualified electrician. Improper repairs may place the user at serious risk
- This unit is not a tos1. Keep the unit out of reach of children.
TURNING ON YOUR EARBUDS
METHOD I: Remove your earbuds from the charging case. Both earbuds’ LEDs will
flash blue.
METHOD 2: If the earbuds are not inside the charging case or are turned off. Press and hold the Multifunction buttons for 2 seconds until the blue LEDs flicker and you hear
“Power ON·.
TURNING OFF YOUR EARBUDS
METHOD I: Place your earbuds back into the charging case.
METHOD 2: Press and hold the Multifunction button on either earbud for a few seconds until you hear “Power OFF”.
BLUETDDTH PAIRING INSTRUCTIONS
FIRST: Remove both earbuds from the charging case. These will begin auto-pairing
to each other. You will hear “Probuds connected.”
SECOND: Keep the earbuds within 3 feet of your smart device for Bluetooth pairing only. Enable your device’s Bluetooth function from its Settings menu. Select T zumi Probuds· from the Bluetooth device list to pair the earbuds to your device. Once paired. You will hear ·oevice connected·. Your Probuds are now ready to use!
SINGLE EARBUD USAGE
Each earbud can be used independently.
Calling/Music
ANSWER/END CALL – Press the RIGHT or LEFT earbud button once during an incoming call to answer. Or press during a call to end.
REJECTING A CALL – Press and hold the RIGHT or LEFT earbud button during an
incoming call.
PLAY/ PAUSE – Press the RIGHT or LEFT earbud button one time.
NEXT SONG – Press and hold the RIGHT earbud button.
REWIND / PREVIOUS SONG – Press and hold the LEFT earbud button.
VOICE ASSISTANT
Press the RIGHT or LEFT earbud button once to activate/exit the Voice Assistant/5iri function. This function may not work with all devices.
CHARGING SOUNDMATES
Make sure to fully charge the earbuds before your first use. Please note: If you are only
using one earbud and the second one is fully charged. In this case, be sure to remove it before inserting the second one. The LED Indicator will illuminate to confirm that both are connected and charging.
CHARGING THE CASE – Plug the standard Micro-U5B charging cable into the port on the case and connect the USB head to a power source. Such as an AC wall adapter or computer. The LED will flash green while charging. Once fulls! Charged. LED will illuminate solid green.
CHARGING THE EARBUDS – When the earbuds are low on power. s1ou will hear “BatfersJ Low·. Place the earbuds into their respective slots in the charging case. These will automatically begin to charge. The LEDs will turn solid red while charging. The LED on the bottom of the case will turn white. Once fulls) charged. The LEDs on the earbuds and case will turn off.
SPECIFICATIONS
- Bluetooth Technology: Version 5.0
- Battery (Earbuds: 30 mAh lx21: 3. N
- Battery (Charging Case): 500 mAh: 3 .N
- Input Power Supply: □[ SV/IA
- Earbuds Charging Time (Est]: I hr
- Charging Case time (Est]: I hrs
- Music Playback Time: Up to 3 hrs
- Talking Time: Up to 3 hrs
- Frequency: 20 – 2DKHz
FOR MORE MANUALS BY TZUMI, VISIT MANUALSLIBRARYY
Tzumi 7058 Auto Pairing Wireless Earbuds-FAQs
How do I turn on my Tzumi earbuds?
Press and hold the multifunction button until the blue light appears and you hear “Power On.”
How do I pair the earbuds with my device?
The earbuds enter pairing mode automatically. Open your device’s Bluetooth settings, select “Tzumi SoundMates”, and wait for the “Connected” voice prompt.
How do I know if my earbuds are charging?
When placed in the case, a red light indicates charging. The light turns off once fully charged.
How do I check if the charging case is full?
Look at the LED indicators inside the case. When all lights stay solid, the case is fully charged.
Why are my earbuds not connecting?
Ensure they are charged, stay within 3 feet of your device, and reset if needed before re-pairing.
How do I reset the Tzumi earbuds?
Turn off both earbuds, then press and hold the multifunction button until you hear the reset tone. Reconnect via Bluetooth.
How do I sync both earbuds together?
Place them in the case, remove them again, and they should auto-sync. If not, press the buttons on both earbuds to reconnect them manually.
Can I connect the earbuds to more than one device?
Some versions allow dual pairing, but most require disconnecting from one device before connecting to another.
How do I use the earbuds for the first time?
Charge them fully, remove from the case, and pair with your device through Bluetooth.