Edge CS CTS Insight Color Touch Screen
LIMITATION OF WARRANTY
Edge Products, LLC, MSDP Inc., (hereafter “SELLER”) gives Limited Warranty as to description, quality, merchantability, fitness for any product’s purpose, productiveness, or any other matter of SELLER’s product sold herewith. The SELLER shall be in no way responsible for the product’s open use and service and the BUYER hereby waives all rights other than those expressly written herein. This Warranty shall not be extended or varied except by a written instrument signed by SELLER and BUYER.
The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product’s kit. All products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by Edge Products Inc.
Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any other contingent expenses. If the BUYER sends back a failed unit that is out of warranty and chooses to buy a refurbished unit, the refurbished unit will only carry a 90-day warranty.
If the BUYER purchases a new unit at a predetermined discounted rate, it will have the standard 1-year warranty. Under no circumstances will the SELLER be liable for any damage or expenses insured because of the use or sale of any such equipment. IF THE BUYER DOES NOT AGREE WITH THIS AGREEMENT, THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE, TO THE PLACE OF PURCHASE WITHIN THIRTY (30) DAYS FROM DATE OF PURCHASE FOR A FULL REFUND.
INTRODUCING THE CS AND CTS MODELS
From the pioneers in display-based technology and engine performance management, comes the CS (Color Screen) and CTS (Color Touch Screen) for popular domestic late-model trucks and SUVs. Edge has reinvented four of its most popular lines – the Insight*, Mileage Max*, Evolution, and Juice/Attitude*– with an all-new look and cool new features.
THE BREAKDOWN
Four product lines and two screen options—it’s just that simple. Edge has given its best-known products—the Insight, Mileage Max, Evolution, and Juice/Attitude—a fresh look, improved features and benefits, and pricing that will make the competition obsolete. Consumers can choose the product that suits their needs and the screen option that best suits them.
THE CS (COLOR SCREEN)
The CS – an acronym for Color Screen – has a familiar feel of Edge’s popular legacy Attitude and Evolution. This new full-color digital display features a ruggedized case, user-friendly buttons, an easy-to-navigate menu, and a light sensitivity sensor that automatically adjusts the brightness for improved night viewing.
THE CTS (COLOR TOUCH SCREEN)
The CTS—an acronym for Color Touch Screen—is the pinnacle of what made Edge popular: innovation. The CTS model features a full-color, button-free, touch-screen digital display, an easy-to-navigate menu, a light sensitivity sensor that automatically adjusts the brightness for improved viewing, and a video-in jack that supports most off-the-shelf backup cameras or DVD players with an RCA jack.
MOUNTING OPTIONS & ACCESSORIES
Both CS and CTS devices come with a standard windshield mount from Arkon Resources Inc., the leader in device mounting solutions. The CS and CTS devices have a standard two-tab system built in so they can accept an array of different Arkon mounts.
The CS unit will also fit into any of Edge’s popular custom dash pods or pillar mounts. The CS and CTS will accept various sensors (e.g., EGT sensor, wideband O2 sensor, etc.), so customers can customize their devices with accessories to fit their needs.
PARTS INCLUDED
CTS Device
The CTS device provides you with an interface to change the performance programming on your vehicle as well as gives you a multi-color touchscreen display which allows you to monitor multiple vehicle parameters in real time. It is equipped with a large touch screen, a USB port (for PC communication and electronic updates), a 16-pin connector (for main vehicle communication), a video-in jack, and a six-pin accessories connector which allows you to further extend the capabilities of the device (see the accessories page in the back of the manual).
CS Device
The CS device provides you with an interface to change the performance programming on your vehicle as well as gives you a multi-color screen display which allows you to monitor multiple vehicle parameters in real time. It is equipped with a full-color screen, a Menu button, an Up and Down Arrow button, an Enter button, a USB port (for PC communication and electronic updates), a 16-pin connector (for main vehicle communication), and a six-pin accessory connector.
CS/CTS Windshield Mount
The windshield mount supplied with your CS/CTS kit is designed to give you flexibility in mounting your device anywhere you’d like on your windshield. It is equipped with a locking suction cup, a vertically adjustable arm, and a 180-pivot head which allows you to fine-tune the viewing angle to your preference.
CS/CTS OBDII Connector
The OBDII connector/cable has two plugs, a smaller male 16-pin plug that connects to the back of your device, and a larger rectangle-style 16-pin male connector that connects to the OBDII port located under the driver’s side dashboard. The purpose of this connector is to provide a communication link between your vehicle and your device as well as provide a power and ground source.
Mini USB Cable
The USB cable is used to connect your device to your PC to perform firmware and calibration updates using Edge Products Fusion software. It is recommended you plug both USB connectors into the computer and complete the Fusion software installation before connecting the device.
CS/CTS Compact Disc
The CS/CTS compact disc contains the Fusion update software, and PDF files for the Installation manual as well as the quick install guide.
Alcohol Pad
The alcohol pad is supplied for cleaning the windshield before mounting the suction cup-equipped Arkon mount.
Zip Ties
The zip tie packet contains zip ties to help you secure the OBDII cable out of the way under the dash.
Step 1: Locating the OBDII Port
The OBDII port is a 16-pin connector like the illustration below.
The OBDII port is located under the dash below the steering wheel. The OBDII port is placed in different locations under the dash for different applications; refer to the OBDII port location drawing (left) to help you locate your OBDII port.
Step 2: Connecting/Routing the OBDII Cable
Remove the panel on the side of the dashboard to provide access to route the OBDII cable from the OBDII port up to the top of the dash.
Once you’ve removed the necessary panels, connect the OBDII cable to the OBDII port, and route the cable under the dash, out the side panel, up be- tween the door seal trim and the edge of the dash. Tuck the cable back as far as you can as you route it up to the dash.
Step 3: Position the Control Unit
Position the device and the mount on the windshield in the desired location. Pay attention to where the suction cup will mount on the windshield.
Step 4: Connect the Mount and OBDII Cable
Before you attach the suction cup portion of the mount to the window attach it to the device. Insert the tabs on the mount into the slots on the back of the device and slide up (CTS) or to the side (CS) until it stops.
Next, insert the connector on the end of the OBDII cable into the 16-pin connector on the back of the device (this is easier if done before mounting the device on the window). The connector only fits one way so be sure that the locking tab is on the bottom.
Step 5: Position and Lock the Unit on the Windshield
Once the alcohol has dried you’re ready to attach the mount to the windshield. You’ll notice that the mount has a locking tab. This tab creates the suction that will lock the mount to the windshield. Make sure the lock is in the “Unlocked” position. Position the mount where you’ve cleaned the windshield, press firmly, and push the tab to the “Locked” position.
Once you’ve locked the mount to the windshield, use the adjustment knobs to fine-tune the viewing angle and height of the CTS/CS device.
Step 6: Verify Position and Viewing Placement
After you’ve locked the mount and the CS/CTS device is in place on your windshield, sit back in your driver’s seat and make sure the viewing angle is as desired. Check to make sure the device doesn’t create a blind spot that may impair your view of the road/traffic/pedestrians from the driver’s seat.
Step 7: Remove Cable Slack/Replace Panels
After positioning the device and the mount, remove any slack in the OBDII cable and coil it behind the side panel you removed earlier. Use the supplied zip ties to secure the coiled cable from moving, falling under the dash, or interfering with pedal operation. Replace all panels removed during installation.
CTS / CS Device Descriptions
CTS / CS Device Descriptions
CTS LAYOUT
- Main Menu button – The main menu button gives you access to the main menu.
- Left Gauge – The left gauge is one of three analog-style gauges. The displayed parameter for all gauges can be changed by simply touching the gauge and choosing a different parameter from the drop-down list.
- Power level up/down Arrows – On the JUICE ATTITUDE these buttons are used to toggle the power level up/down. On the EVOLUTION, INSIGHT, and MILEAGE MAX, these buttons may be used for future feature enhancements.
- Alert Indicator – The alert indicator light will illuminate (red) when an alert limit is exceeded. When this light contains an “R,” it indicates that your Diesel Particulate Filter (DPF) equipped the vehicle is performing a regeneration cycle.
- Power Level Indicator – The power level indicator represents the current power level. 0 represents stock.
- Backdown Indicator – (Juice/Attitude only) The backdown indicator light will illuminate (yellow) when the Juice module is decreasing power added by the device while exceeding a backdown limit. The light will contain one of the following characters; E = EGT, S = Transmission Slip, and C = Cold Engine.
- Right Gauge – The right gauge is one of three analog-style gauges.
- Lower Left Gauge – The Lower Left Gauge is one of two digital gauges.
- Center Gauge – The Center gauge is one of three analog-style gauges.
- Lower Right Gauge – The Lower Right Gauge is the second of two digital gauges.
CS LAYOUT
- Up/Down Arrow Button – On the JUICE ATTITUDE these buttons are used to toggle the power level
up/down. On the EVOLUTION, INSIGHT, and MILEAGE MAX, these buttons may be used for future feature enhancements. In the menus, these buttons are used to select the menu items and increase or decrease values. - Menu Button – The menu button gives you access to the main menu.
- Left Gauge – The left gauge is one of two analog-style gauges. The displayed parameter for all gauges can be changed by pressing the enter button, choosing the desired gauge, and selecting a different parameter from the drop-down list.
- Alert Indicator – The alert indicator light will illuminate (red) when an alert limit is exceeded. When this light contains an “R,” it indicates that your Diesel Particulate Filter (DPF) equipped vehicle is performing a regeneration cycle.
- Power Level Indicator – The power level indicator represents the current power level. 0 represents stock.
- Backdown Indicator – (Juice/Attitude only) The backdown indicator light will illuminate (yellow) when the Juice module is decreasing power added by the device while exceeding a backdown limit. The light will contain one of the following characters; E = EGT, S = Transmission Slip, and C = Cold Engine.
- Right Gauge – The right gauge is one of two analog-style gauges.
- Enter Button – The enter button when pressed from the main screen will allow you to change the gauge parameters. In the menus it allows you to select the highlighted option.
- Center Gauge – The center gauge is a bar-style gauge.
Navigating the Menu System
The main menu consists of 6 options
- View camera – shows the camera the camera image.
- Show alerts – shows the current, active alerts and their current set values.
- Programming – allows you to program the vehicle to one of the pre-tuned power levels included with the Mileage Max or Evolution. This is not present in the Juice-Attitude.
- Diagnostics – gives you the ability to scan and clear trouble codes, as well as data stream certain key vehicle functions.
- Options – gives you access to the Alert Settings, the Screen Layout, and the Brightness menus. All of these menus will allow you to change their related parameters.
- Help – is used to display product and vehicle information, as well as Edge Products contact information, and technical support tools.
Menu Navigation Buttons
Both the CS and CTS devices provide you with the following three buttons for navigating the menu system:
- Menu: The Menu button allows you to enter the main menu (CS only). Once you are in the main menu you’ll use the Menu button to return to the previous screen.
- UP/Down Arrow: The Up/Down Arrow button will allow you to toggle up or down through the menu options, you’ll notice it highlights each option as you toggle.
- Enter: Pressing the enter Button will select the currently highlighted option.
Menu Time-out
The CS and CTS devices have a built-in time-out feature. The purpose of this time-out is to prevent the unit from staying powered up for excess amounts of time. If you leave the device in a menu option and then exit the vehicle, the device will stay powered up for 300 seconds by default, after which it will return to the main menu and then power off. If left in a menu while the truck is running or the key is on it will return to the main menu after 300 seconds. You can adjust the wait time to be longer or shorter by simply using the arrows to take the time up/down.
Factory Reset
If you would like to revert to the factory default settings, simply select Factory Reset and choose YES on the screen above. Many of the settings will be returned to the defaults as they were when the unit was new. Any changes you’ve made to the alerts, the gauge screen displays, etc will be returned to the defaults set by Edge Products.
Camera Delay (CTS ONLY)
The Camera Delay menu item is always displayed. If you don’t have a camera or other RCA device connected, this menu option will not affect device functionality in any way. The CTS is designed to automatically engage the backup camera when the vehicle gear selector is in Reverse (may not function on all vehicle models).
The camera delay will allow you to customize the delay time for the device to switch from the main viewing screen to the camera view. If this is set too short then you’ll see the device blink as you move the gear selector past Reverse. If it’s set too long the screen may not appear before you start backing up. Some vehicles will communicate gear position faster than others, so this menu option allows you to customize the delay to your liking.
Tech Support Tools
The Technical Support Tools menu contains tools made specifically to help Edge Products Technical Support representatives help customers when they are experiencing problems with their vehicle or device. This menu should only be used when requested by Edge Products Technical Support personnel. The tools contained in this menu are locked and will not function without specific numbers provided by Edge Products Technical Support.
Trouble Shooting/ Tips
Tip: Programming your vehicle may expose existing defects in your vehicle’s PCM that could disable your vehicle. It is advised that you do not program your vehicle in remote locations in case of failure.
Tip: Keep in mind that the CTS/CS is a high-performance product and that not all vehicles deliver the same power output when programmed with the CTS/CS. It is recommended that you select a program that will best fit your needs. Whether towing or traveling long distances at high speeds, choose your power level wisely and keep in mind the condition and tolerances of your vehicle when selecting a suitable power level.
Tip: Register your product at www.edgeproducts.com Registering your product allows us to know exactly which product you have and provide important product updates to you that improve the quality and/or safety of the product. Registering also provides a record in case of product loss, theft, or required warranty work. When you call us for support our team will already have much of the information they need to help you.
| TROUBLESHOOTING GUIDE | ||
| SYMPTOM | POSSIBLE CAUSE | SOLUTION |
| The screen beeps for two seconds (long beep) | The unit is too hot from being in direct sunlight | Once the device cools down the screen will turn on |
| No display when the key is in the “on” position | The unit will not wake up with the key in the “on” position until the screen is touched or any button is pressed | Touch the screen or start the vehicle, if this does not turn the screen on then you will need to call technical support |
| The vehicle does not start after programming | The calibration may have not been written correctly | Select “Return to stock” from the programming menu and try to start the vehicle again. If the problem continues contact technical support |
| Fusion drivers will not install correctly | The drivers were not successfully installed by the automatic installer | Manually install the drivers, Edge technical support can provide you with instructions on how to do this |
| Camera picture is frozen | Bad connections | Cycle the key off and on. |
| Error 16 when programming | There was a communication error | Try to program the level again |
| Screen beeps quickly | Possible device malfunction | Update the device using the fusion software |
| Edge EGTs are not displaying | The connector on the back of the device is not fully seated | Make sure the cable connection is not upside down, and push the cable until it is fully seated |
Commonly Used Acronyms
- ACT = Air Charge Temp
- ACV = Air Control Sensor
- AOD = Automatic Overdrive Transmission
- APP = Accelerator Petal Position
- AXOD = Automatic Overdrive Transmission
- BAT = Battery Voltage
- BCM = Body Control Module
- BOO = Brake On/Off Switch
- BP = Barometric Pressure Sensor
- CCD = Computer Controlled Dwell
- CCO = Converter Clutch Override
- CDR = Crankcase Depression Regulator
- CEL = Check Engine Light
- CFI = Central Fuel Injection
- CHT = Cylinder Head Temperature
- CID = Cylinder Identification Sensor
- CKP = Crank Position Sensor
- CMP = Cam Position Sensor
- CPS = Crankshaft Position Sensor
- CS = Color Screen
- CTS= Color Touch Screen
- PDF = Diesel Particulate Filter
- DTC = Diagnostic Trouble Codes
- ECA = Electronic Control Assembly
- ECM = Electronic Control Module
- ECT = Engine Coolant Temp
- EDF = Electric Drive Fan Relay
- EDIS = Electronic Distributor
- EGO = Exhaust Gas Oxygen Sensor
- EGR = Exhaust Gas Recirculation
- EGRC = EGR Control Solenoid
- EOT = Engine Oil Temperature
- EVP = EGR Position Sensor
- EVR = EGR Valve Regulator
- FDM = Fuel Delivery Module
- FPM = Fuel Pump Monitor
- FRP = Fuel Rail Pressure
- HEGO = Heated Exhaust Gas Sensor
- IAT = Intake Air Temperature
- ICM = Integrated Controller Module
- IDM = Ignition Driver Module
- ISC = Idle Speed Control
- ITS = Idle Tracking Switch
- IVS = Idle Validation Switch (Diesel)
- KAM = Keep Alive Memory
- KOEO = Key On Engine Off
- KOER = Key On Engine Running
- KS = Knock Sensor
- LOAD = Engine Load
- LOS = Limited Operation Strategy
- LPD = Line Pressure Desired
- LUS = Lock-up Solenoid
- MAF = Mass Airflow
- MAFV = Mass Airflow Sensor Voltage
- MAP = Manifold Absolute Pressure
- MAT = Manifold Air Temp
- MCU = Microprocessor Control Unit
- MIL = Malfunction Indicator Light
- MPH = Miles Per Hour
- OHC = Over Head Camshaft
- OSS = Output Shaft Speed
- PCM = Powertrain Control Module
- PFE = Pressure Feedback EGR Sensor
- PIP = Profile Ignition Pickup
- PSPS = Power Steering Pressure Switch
- RPM = Revolutions Per Minute
- SES = Service Engine Soon
- SIL = Shift Indicator Light
- SPARK = Spark Advance/Retard
- SPOUT = Spark Output Signal (from ECA)
- STAR = Self-Test Automatic Readout
- TAPS = Throttle Angle Position Sensor
- TCM = Transmission Control Module
- TFI = Thick Film Ignition System
- TFT = Transmission Fluid Temperature
- TGS = Top Gear Switch
- THS = Transmission Temperature Switch
- TPS = Throttle Position Sensor
- TQC = Torque Control
- TSS = Turbine Shaft Speed
- TTS = Transmission Temperature Switch
- VAF = Vane Air Flow Sensor
- VAT = Vane Air Temperature
- VCT = Variable Cam Timing
- VSS = Vehicle Speed Sensor
- WAC = WOT A/C Cut-off Switch
- WOT = Wide Open Throttle
For more manuals by Edge visit, ManualsLibraryy
Edge CS CTS Insight Color Touch Screen-FAQs
How do I connect my Edge tuner to a computer?
1. Ensure your computer has internet access.
2. Open the Fusion software on your desktop.
3. When prompted, connect the tuner to your computer using the supplied USB cable.
4. If an update is available, click YES to proceed.
How do I update my Edge CTS monitor?
1. Visit www.edgeproducts.com.
2. Click on the UPDATES tab.
3. Select Download Update Agent 1.0 for Mac or PC.
4. Connect your device to the computer using the provided USB cable.
5. Locate the CTS3 drive in your file explorer and follow the update instructions.
How do I reset my Edge monitor?
1. Press the lower right button to open Status.
2. Press it four times to navigate to Factory Service.
3. Press the upper left button to view Server Details.
4. Press the lower right button to access Factory Restore and reset the monitor.
How do I update Microsoft Edge?
1. Open Microsoft Edge and go to Settings and more > Help and feedback > About Microsoft Edge (or enter edge://settings/help in the address bar).
2. If an update is available, select Download and install.
3. If Edge is already updated, no further action is needed.
Can I upgrade my Edge Insight to an Evolution tuner?
Yes! To upgrade:
1. Open Fusion Update Software on your PC.
2. Plug in your Edge Insight device.
3. Fusion will check for updates and then show upgrade options.
4. Select the Evolution upgrade option.
How do I restart Microsoft Edge?
Bookmark edge://restart for a quick one-click restart. You can also bookmark edge://quit to close all open windows instantly.
How do I restart my Edge monitor?
1. Disconnect the power from the monitor or unplug it from the wall.
2. Wait at least 10 seconds before reconnecting the power.
3. When restarted, both the green and blue LEDs should light up.
How do I clear data in Microsoft Edge?
1. Open Settings and more > Settings > Privacy, search, and services.
2. Under Delete browsing data, click Clear browsing data now.
3. Select Choose what to clear, then confirm the action.
Can I use Edge Insight CTS3 for custom tuning?
Yes! The Edge Insight CTS3 now supports custom tuning without additional hardware. Check Edge’s website for a list of approved calibration shops and tuners.