JBL Endurance RACE TWS Earbuds
WHAT’S IN THE BOX
APP
How to wear
- Mix and match for a perfect fit and audio performance.
First time use
Power on & CONNECT
DUAL CONNECT
CONTROLS
* Enable advance controls by connecting your JBL ENDURANCE RACE TWS to JBL Headphones App .
** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO Y OUR PREFERRED EARBUD (L/R).
Power off
MANUAL SETUP
DO MORE WITH THE APP
CHARGING
WATERPROOF & DUSTPROOF IP67
LED behaviors
TECH SPEC
- Model: ENDURANCE RACE
- Driver size: 6mm 1/4 Dynamic Driver
- Power supply: 5V=1A
- Earbud: 6.2 g per pe (12.4 g combined) 0.014 Ibs per pe (0.028 Ibs combined)
- Charging case: 4499/0099 Ibs
- earbud battery type: Lithium-ion Battery (70 mAh /3.85V)
- Charging case battery type: Lithium-ion Battery (S50 mAh /3.7V)
- Charging time: <2hrs from empty
- Music playtime with BT on: > 10s
- Frequency response: 20Hz-20kHz
- Impedance: 16 0hm
- Sensitivity: 99 dB SPL@1 kHz
- Maximum SPL: 9248
- Microphone sensitivity: -38.dBV/Pa kHz
- Bluetooth version: 52
- Bluetooth profile version: A2DPVL3, AVRCPV1.6, HEPAT
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: < 10 dBm
- Bluetooth transmitter modulation: GFSK, π/4QPSK, BDPSK.
- Maximum operation temperature: 45°C
For more manuals by JBL, visit ManualsLibraryy
JBL Endurance RACE TWS Earbuds- FAQs
Are JBL Endurance Race earbuds waterproof?
Yes, they have an IP67 rating, making them both waterproof and dustproof. However, they are not suitable for swimming, as Bluetooth doesn’t work underwater. For swimming, consider the JBL Endurance Dive with built-in MP3 functionality.
How long does it take to charge the JBL Endurance Race TWS?
A 10-minute Speed Charge provides up to 1 hour of playtime. Full charging may take longer depending on usage.
How do I know when my JBL earbuds are fully charged?
While charging, the earbuds show a solid red light. Once fully charged, the red light turns off. The charging case shows its status using white LEDs.
How do I turn on noise cancelling on the JBL Endurance Race TWS?
Noise Cancelling is enabled by default. To switch between ANC and TalkThru, short press the multi-function button on the left earbud. To turn off ANC, long-press the same button.
Can I wear JBL Endurance Race earbuds in the shower?
They are waterproof (IP67), so occasional splashes are fine. However, showering is not recommended as water may trigger the touch controls unintentionally.
Do these earbuds have Active Noise Cancelling?
Yes, they feature Active Noise Cancelling (ANC) and Smart Ambient modes to help you block out or allow in surrounding sounds without removing the earbuds.
Is there a JBL app for controlling the earbuds?
Yes, you can use the JBL Headphones app to adjust settings, control noise cancelling, manage ambient sound, and more.
Can I leave my JBL earbuds charging overnight?
Yes, JBL earbuds have built-in overcharge protection, so overnight charging won’t damage them. However, unplugging after a full charge helps preserve long-term battery health.
What does the red light on my JBL Endurance earbuds mean?
A solid red light indicates the earbuds are charging. Once fully charged, the red light will turn off.