TaoTronics SoundLiberty 80 Wireless Earbuds
PACKAGE CONTENTS (Fig. 1)
- TaoTronics True Wireless Stereo Earbuds (TT-BH080)
- 1 x USB-C Charging Cable
- 1 x User Guide
- 1 x Quick Start Guide
PRODUCT DIAGRAM (Fig. 2)
- Multifunction Touch Control
- Charging Contacts
- Microphone
- Charging Slot
- Charging Case
- Charging Indicator
- Reset Button
- USB-C Charging Port
IMPORTANT SAFETY INSTRUCTIONS
Please read the instructions thoroughly before using this product and retain it for future reference.
Hearing Safety
- Do not wear earbuds with high volume for a long time to avoid damaging your hearing.
- Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
- Do not set the volume too high to stay aware of your surroundings.
- Please refer to local laws and regulations if you want to answer phone calls via this device while driving.
- For your safety, avoid distractions from music or phone calls when you are driving or doing other activities with potential dangers.
Warning: Please set the volume to a proper level to avoid hearing damage.
Caution - Do not expose this product to high temperatures.
- Do not immerse the earbuds in water or expose them to humidity for a long time.
- Do not clean the product with detergent containing alcohol, ammonia, benzene, or abrasives.
- Avoid dropping.
- Place the earbuds back into the charging case when not in use and keep them away from children and pets to avoid a choking hazard.
- Unauthorized disassembly of any parts of this product is forbidden, which may cause a fire hazard, warranty, and/or property loss.
- Close attention is needed when using near children.
- Keep the charging case away from water, rain, or any other liquid.
- Don’t use the product in a thunderstorm to avoid malfunction or electric shock.
- Always ask a professional technician or authorized personnel for repair.
This product contains a lithium battery. Never expose it to excessive heat, such as direct sunlight or fire, to avoid an explosion.
SMART AL NOISE REDUCTION TECHNOLOGY FOR CLEAR CALLS
Elevoc Vocplus is a DNN-based noise reduction technology that can extract your speech intelligently and make your caller hear your clear voice by removing background noises.
WEAR YOUR EARBUDS
Please wear the earbuds as shown below (Fig. 3).
Bluetooth Caution
- When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference.
- The maximum effective Bluetooth range may vary with the environmental circumstances.
- When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles, including walls and fences, may shorten the effective range.
USING YOUR EARBUDS
Charging
Charging the Earbuds
- Put the earbuds into the charging case. (Fig. 4).
- Cover the lid, and charging will start automatically (Fig. 5).
Note:
- Please fully charge the earbuds when using them for the first time.
- When the battery is low, a “Battery low” voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later.
- Charge the earbuds at least once every 3 months when not in use for a long time.
Charging the Charging Case
- Connect the charging port with any USB charging adapter or active computer USB port (Fig. 6).
- The charging indicator will flash slowly in white and turn solid on once fully charged.
Note: Unplug the charging cable (timely) when fully charged.
Power On (Fig. 7)
Uncover the lid and they will power on automatically.
Power Off (Fig. 8)
Put the earbuds into the charging case and close the lid; they will turn off automatically.
Pairing
- You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions.
- Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds.
- When the earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.
Couple Earbuds Mode
- Uncover the lid to turn on the earbuds, and they will connect automatically and then enter pairing mode.
- Turn on the Bluetooth function on your device and search for nearby devices. Find “TAOTRONICS Sound Liberty 80” in the search results, tap on the name to connect.
Note:- The earbuds can remember the devices paired previously and will attempt to pair with the last connected device. If re-pairing failed, the earbuds will enter pairing mode.
- It is not recommended to wear the two earbuds on different people. If necessary, please keep the two earbuds close to each other in a couple earbuds mode.
Single Earbud Mode
Single Earbud Mode is available only when the earbuds have been paired with your device in Couple Earbuds Mode.
- Take out one earbud from the charging case, and make sure the other one is placed in the charging case and the lid is closed.
- It will try to pair with the last paired device in Couple Earbuds Mode.
- If pairing fails, re-pair both earbuds with your Bluetooth® device first as instructed in the “Couple Earbuds Mode” section.
Note:
If you want to change to couple mode, simply take out the other earbuds from the charging case, and they will pair with each other automatically.
Clear Pairing List
If you failed to pair your device with the earbuds, please clear the pairing history as instructed below:
- If you have paired your device with the earbuds before, remove “TAOTRONICS Sound Liberty 80” from the Bluetooth device list first.
- Uncover the lid and make sure both earbuds are placed in the charging case.
- Press and hold the Reset Button at the back of the charging case for 10 seconds until the indicator flashes white three times. The pairing history is then cleared.
- The earbuds will enter pairing mode automatically.
Note:
If you want to pair the earbuds with another device when already paired, place both earbuds in the charging case and press the Reset Button twice to disconnect the currently paired device. The earbuds will then enter manual pairing mode.
VOICE CONTROL
TAOTRONICS Soundliberty 80 supports hands-free voice control. You can directly control your earbuds with simple voice command keywords.
Note: The wake-up rate may be affected when using voice control in a noisy environment.
OPERATION AND FUNCTIONS
Note: The Multifunction Touch Control is available only when you are wearing the earbuds.
CLEANING AND MAINTENANCE
- Clean the earbuds and the charging case on a regular basis.
- Use a dry and soft cotton cloth to wipe the unit.
Note: Do not insert anything into the product. - Keep away from sharp objects to avoid scratches.
- Put the unit in a dry and shady place if it is to be idle for a long time.
- Do not clean the product with detergent or chemicals.
TROUBLESHOOTING
WARRANTY AND SERVICE
If any problems occur, please contact the TaoTronics Customer Care Centre via the contact information listed in this User Guide.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Sunvalleytek International Inc. is under license. Other trademarks and trade names are those of their respective owners.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For more manuals by TaoTronics, visit ManualsLibraryy