Veatool T16 True Wireless Sports Earbuds
WHAT’S IN THE BOX?
- Charging Case x1
- Type-C Cable x1
- User Manual x1
- Wireless Earbuds x2
- Ear Tips x3
Note: Please Remove Protective Films from The LED Power Display and Charging Contacts Before Using It.
Owerview
Product Parameters
- Bluetooth Version: BT5.0+EDR
- Supports: HSP/HFP/A2DP/AVRCP
- Charging Interface: Point-Contact
- Charging Port: Type-C
- Battery Capacity: (Li-ion battery inside) Earbud: 50mAh
Charging case: 600mAh - Battery Life: Twin Earbuds will last 8 hours on a single full charge(Actual battery life changes with the song types and volume requirements)
- Standby Time: Up to 100 hours
- Charging Time: 1-1.5 Hrs for earbuds / 2Hrs for charging case
- Transmission Range: 33 feet (with no obstacle)
- Earbud Weight/Size: 0.28 oz/PC; 2.1*1.4*1.o in
- Charging Case Weight/Size: 2.19 oz/PC; 3.6*2.4*1.3 in
How to pair two headphones with my phone?
(Prior to first use – Please be sure both the Earbuds and the Charging Case are fully charged.)
- Step 1 – Take both headphones out of the charging case. The twin Earbuds will power on and pair with each other automatically. [If the earbuds are not connected to your device for over 3 minutes, the earbuds will power off automatically. Turn on the headphones manually by pressing down the MFB for about 3 seconds at the prompt “Power on” and one beep sound.] “R” earbuds alternate flash red-blue light, and “L” earbuds flash blue light means TWS pairing is done.
- Step 2 – Activate Bluetooth settings on your phone, search and choose “VEATOOL T16″ to connect. [There should be a voice prompt”connected” if you wear the earbuds.] The earbuds’ indicator light off means they are already connected to the mobile.
Tips:
- If there is any issue with pairing both earbuds to your phone, please put the earbuds back into the charging case and repeat the above steps.
- These earbuds cannot only be used together, but also can be used individually. If you want to use single mode, just take one earbud out of the case and connect to your phone; it will be OK. Or when you are using in Dual mode, turn off one earbud manually or put one earbud back into the charging case, you will be able to hang on to the other one by single mode.
How to wear the earbuds correctly?
Take out “R earbud” to wear on the right ear.
The ear hooks are adjustable; you can bend it to fit your ears tightly if needed.
How to place headphones
Function
For Call
For Music
Charging
Earbuds Charging
Earbuds start to charge only when you put the earbuds into the charging slot the right way. (You can charge the charging case and earbuds at the same time, or you can charge the charging case first, then charge the earbuds.
- When being charged, the Earbuds’ LED light will illuminate red.
- When fully charged, the charging case will automatically stop charging, and the earbuds’ LED Red light will go off.
Charging case charging
There is a Type-C USB charging cable in the package. Please use it to charge the case directly. During charging, the digital display will flash and display the battery in real time. After a full charge, the number is displayed as 100.
Charging Warning
- After using for a period of time, the earbuds don’t charge or even can’t even turn on because of an oxidized magnet connector. You can handle this problem by using an alcohol rag to clean the magnet connector on the earbuds and charging case.
- Earbuds can automatically turn off immediately, meanwhile, start charging when you put them back into the charging case. It will also automatically turn on and pair when you pick it up.
Storage and Maintenance
- If the earbuds have been unused for more than 3 months, we recommend that you charge them.
- Please use chargers that are FCC(Federal Communications Commission) approved.
- Do not disassemble the Earbuds.
- Adult supervision is required for children aged 6 and under.
- Do not expose the earbuds to high or low temperatures, do not use the earbuds in a thunderstorm. Avoid falling or violent impact of the device. Keep the device away from fire, do not put the device in water.
- Do not use oil or any volatile liquid to clean this product.
FAQs
Q: Why can’t these earbuds can not pair with my mobile phone?
A:
- Please make sure the earbuds are fully charged and powered on.
- Please make sure the Bluetooth of your phone is turned on.
- If the above 2 points have no problem, please put the earbuds into the case again and close the case, hold on for a minute, then open the charging case and reconnect the earbuds with your phone.
Q: Why does the music cut in or cut out?
A: First, please do not let the distance between these earbuds and your phone be more than 33 feet(without obstacles). If the distance is less than 33 feet, please take steps as follows:
- Put the earbuds back into the case and close the case, forget “VEATOOL T16” on your phone
- After 10s later, open the case and reconnect these earbuds to your phone
Q: When on a phone call, can | hear the voice in both Earbuds?
A: Yes, you can hear the voice in both earbuds when both earbuds are paired and connected to the same mobile phone.
Q: Are these earbuds sweatproof and waterproof?
A: These earbuds are IPX5, which means sweatproof and slightly waterproof. As for electronic products, we do not suggest soaking the earbuds in water.
Warm Prompt
No matter whether the product is lost, outdated, broken, or you just don’t like it, please contact our customer service email at [email protected], the dedicated specialists will be delighted to answer your questions.
For more manuals by Blogs, visit ManualsLibrayy
Veatool T16 True Wireless Sports Earbuds-FAQs
Are Veatool T16 True Wireless Earbuds good?
Yes. Most users find the Veatool T16 earbuds to be a great value, praising their clear call quality, easy pairing, and comfortable fit. While some mention minor connectivity or fit issues, overall customer feedback is positive.
Are Veatool T16 earbuds waterproof?
Yes, the Veatool T16 earbuds have an IPX5 waterproof rating, meaning they are resistant to sweat and light rain, making them ideal for workouts and outdoor use. However, they are not suitable for swimming or full submersion.
How do I pair Veatool T16 earbuds with my phone?
Take both earbuds out of the charging case — they will automatically power on and connect to each other. Then, enable Bluetooth on your phone, search for “VEATOOL T16”, and select it to connect.
How do I use Veatool T16 earbuds?
Once paired, you can use both earbuds for stereo sound or use one earbud at a time. Tap the touch controls to play/pause music, answer calls, or activate your phone’s voice assistant.
What is the battery life of Veatool T16 earbuds?
Each earbud provides about 5 hours of playtime, and the charging case extends total usage to around 25 hours. Battery life may vary with volume level and usage type.
How do I reset my Veatool T16 earbuds?
Place both earbuds in the charging case and close the lid. On your phone, remove “VEATOOL T16” from the Bluetooth list. Wait 10 seconds, then reopen the case and reconnect the earbuds.
Are Veatool T16 earbuds compatible with iPhones?
Yes. The T16 earbuds work perfectly with iPhone and Android devices using Bluetooth 5.3 for a stable, low-latency connection.
Can I use only one Veatool earbud at a time?
Absolutely. You can use either the left or right earbud individually for calls or music. When both are removed from the case again, they automatically reconnect in stereo mode.
How do I charge the Veatool T16 earbuds?
Place the earbuds in the charging case. The LED indicators will light up to show charging status. You can recharge the case using a USB cable connected to any compatible power source.
Do I need to charge the earbuds before first use?
Yes. For best performance, fully charge the earbuds and the charging case before using them for the first time.