
Petwant PWS-118 Pet Water Fountain

Pet Fountain
Before we start: Care Instructions
In order to provide your pet with fresh and clean water continuously, please remember these three simple tasks:
- Refill often.
Keep the water level. The pump is designed to work in water at least one inch deep. If the pump dries, it may malfunction. - Clean your pump and your fountain.
Take your pump and fountain apart to clean with soap and water every two to four weeks. Be careful not to get soap in the filters, as it will not rinse out.
- Replace your filters.
Replace the carbon filter every four weeks when you clean your fountain. Replace the foam filter every two months.
What you have: Use Instructions

Setup Instructions
- Install the pump holder first, then put the pump into the sponge. Put the activated carbon filter in the filter housing and close it.
Soak the filter in a clean bowl for 5 minutes.
Notes:- The filter must be fully soaked before the fountain is turned on; Otherwise, the water may not diffuse through the filter and cause overflow.
- Do not soak the filter in the fountain tank to avoid dust on the surface.
- Open the cover and put it back.

- Connect the power adaptor.

What you have: Use Instructions

Place the fountain where your pet will use it. Fill the bowl with water, leaving a half-inch of space between the water and the rim. Make sure your hands, the cord, and the power adaptor are dry, then plug the fountain into an outlet.
Keep health and happiness flowing!
Clean the pump and fountain every two weeks.
Take off the pump cover and rotor. Use the brush to clean the parts with water.
Cautions
- Be sure to shut down and disconnect the power supply for safety when the equipment is not in use.
- This product is for indoor use only.
- The power adapter and wire plug must not be flooded during cleaning.
- This product is not allowed to run without water (models with an automatic shutdown function without water can be ignored)
- Please disconnect the power supply before maintaining and cleaning the machine.
For more manuals by Petwant, visit ManualsLibraryy
Petwant PWS-118 Pet Water Fountain-FAQs
Which pet water fountain is the best?
There are many options, but the Petwant PWS-118 is a reliable choice for keeping water circulating and fresh, encouraging pets to drink more.
Do pet water fountains use a lot of electricity?
No. The Petwant PWS-118 uses a low-wattage pump, making it very energy-efficient and inexpensive to run.
Do pet water fountains need to be plugged in?
Yes, most models, including the PWS-118, need to be plugged into an outlet. Some cordless or solar models are also available on the market.
How often should I change the water in the fountain?
Filters should be replaced about once every 3–4 weeks, depending on use and water quality.
Is moving water better for pets?
Yes, flowing water stays cleaner, tastes fresher, and encourages cats and dogs to drink more compared to stagnant water.
How do I clean the Petwant PWS-118?
Disassemble the fountain, wash all removable parts with warm soapy water, and rinse thoroughly. A weekly cleaning is recommended.
What material is best for a pet water fountain?
Stainless steel fountains are often preferred for durability and hygiene, but the PWS-118’s design ensures safe and easy cleaning regardless of material.
Can I add ice to the fountain in hot weather?
Yes, adding a few ice cubes is safe and helps keep the water cool for your pet during summer.
How long does the pump last?
With regular cleaning and care, the pump in the Petwant PWS-118 can last 2–3 years or more.


