Beldray BEL02088 Lint Remover
Description of parts
- Lint remover main body
- Power button
- Protection cap
- Cleaning brush
- Lint container
- Blades
- Blade cover
- Charging indicator light
- Type-C charging port
- Type-C charging cable
SAFETY INSTRUCTIONS
- When using electrical appliances, basic safety precautions should always be followed.
- Children aged from 8 years and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is not a toy.
- Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
- If the power supply cord, plug, or any part of the appliance is malfunctioning or if it has been dropped or damaged, cease using the product immediately to avoid potential injury.
- This appliance contains no user serviceable parts; only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm.
- Keep the appliance and Type-C charging cable out of the reach of children.
- Do not fit or use any parts/accessories other than the parts supplied with this appliance, as this may cause damage.
- Do not immerse the appliance in water or any other liquid.
- Do not operate the appliance with wet hands.
- This appliance is for use on fabrics only; it should not be used on skin.
- Do not use the appliance for anything other than its intended use.
- Do not store the appliance in direct sunlight or in high-humidity conditions.
- Do not leave the appliance unattended whilst connected to the mains power supply.
- Do not touch any moving parts on this appliance during use, as this could cause injury.
- Always unplug the appliance after use and before any cleaning or maintenance.
- Always ensure that the appliance has cooled fully after use, before performing any cleaning, maintenance, or storage.
- This appliance is intended for domestic use only. It should not be used for commercial purposes.
BATTERY SAFETY
- The supply terminals are not to be short-circuited.
- In the event of a battery or cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Do not use any cell or battery that is not designed for use with the product.
- Secondary cells and batteries need to be charged before use. After extended storage, it may be necessary to charge and discharge the cells or batteries several times to restore maximum performance.
- Keep batteries out of the reach of children.
- Do not dispose of batteries in a fire.
- Do not dismantle, open, or shred secondary cells or batteries.
- Do not expose cells or batteries to heat or fire.
- Do not crush, puncture, dismantle, or otherwise damage batteries.
- Do not store above 60 °C.
- Avoid storage in direct sunlight.
- Do not subject batteries to mechanical shock.
- Do not dispose of exhausted batteries in household waste.
- Once the batteries have been exhausted, dispose of the unit at a local recycling station. Contact the local government offices for further details.
- This product is fitted with 2 x 1.2 V 600 mAh Ni-MH rechargeable batteries (non-removable).
Care and maintenance
Always switch off and unplug the lint remover from the mains power supply before attempting any cleaning or maintenance.
- Wipe the lint remover with a soft, damp cloth and dry thoroughly. Do not immerse the lint remover in water or any other liquid.
- Check that the blades are free from debris (e.g., hair), as this could affect the performance of the lint remover.
NOTE: The lint container should be emptied and cleaned after each use.
Charging the lint remover
Before first use, the lint remover must be charged for approx 3-4 hours. Subsequent charging times will take max. 8 hours, dependent upon use.
- Connect the Type-C end of the Type-C charging cable (included) into the Type-C charging port on the lint remover.
- Plug the USB end of the Type-C charging cable into a compatible USB charging port; the charging indicator light will flash to indicate that the battery is charging. Once the battery is fully charged, the charging indicator light will stop flashing and remain illuminated.
Using the lint remover
- Remove the protection cap and place the garment to be treated onto a flat, even, and clean surface. Straighten the garment to minimise creases.
- Switch the lint remover on by pressing the power button.
- Guide the lint remover over the garment using repeated, light, circular movements across the surface of the fabric.
- Switch off the lint remover by pressing the power button and replace the protection cap.
NOTE: The lint remover will switch off automatically when the blade cover is unscrewed.
WARNING: To avoid damage to fabrics, always use the lint remover on a flat surface. Do not use the lint remover on buttons, embroidery, zips, loose threads, or stitches. Do not apply pressure during use to avoid damaging the fabric.
Cleaning the lint remover
- Remove the protection cap. Turn the lint container in an anticlockwise direction and pull away from the lint remover main body. Empty any lint from the container into a bin after each use.
- Remove the blade cover by unscrewing it in an anticlockwise direction.
- Carefully remove the blades; use the cleaning brush to scrape off fluff and lint remnants.
- Reattach the blades by pushing them back onto the lint remover main body until secure. Replace the blade cover by rotating in a clockwise direction until secure.
- Attach the lint container by screwing it back onto the main unit in a clockwise direction.
- Replace the protection cap.
WARNING: The blades are delicate and sharp; exercise care during cleaning. Keep fingers and hands away from the blades during cleaning and maintenance.
Storage
Check that the lint remover is cool, clean, and dry before storing it in a cool, dry place.
Troubleshooting
Specifications
- Product code: BEL01034
- Battery: 2 x 1.2 V 600 mAh Ni-MH rechargeable batteries (non-removable)
- Working voltage: 3 V =–
- Charging voltage: 5 V === 1 A
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries, or its packaging means that this product and any batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal.
Some retailers provide take-back services, which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment before disposal. For more information about where to drop off batteries, electrical, and electronic waste, please contact the local city/municipality office, household waste disposal service, or the retailer.
For More Manuals By Beldray, Visit ManualsLibraryy.
Beldray BEL02088 Lint Remover -FAQs
What is the Beldray BEL02088 Lint Remover used for?
The Beldray BEL02088 Lint Remover is a portable fabric shaver designed to remove lint, fuzz, bobbles, and loose fibers from clothing, upholstery, blankets, and other fabrics. It helps refresh worn-looking garments and restore a cleaner, smoother appearance without damaging most materials.
How does the Beldray BEL02088 Lint Remover work?
The device uses rotating stainless steel blades beneath a protective mesh cover to safely trim away lint and fabric bobbles. As the blades rotate, the removed fibers collect inside a detachable lint container that can be emptied after cleaning sessions.
Is the Beldray BEL02088 safe to use on delicate fabrics?
Yes, the lint remover is generally safe for many delicate fabrics when used carefully and with light pressure. However, users should avoid using it aggressively on extremely thin or sensitive materials to reduce the risk of accidental fabric damage or snagging.
Can the Beldray BEL02088 remove pet hair from clothing?
The lint remover can help reduce loose pet hair and surface fuzz from fabrics, although it is mainly designed for lint and bobble removal rather than deep pet hair cleaning. Many users still find it useful for refreshing clothing and soft furnishings with light pet hair buildup.
Is the Beldray BEL02088 rechargeable or battery powered?
The Beldray BEL02088 is battery-powered, making it portable and convenient for travel or quick fabric maintenance around the home. Users can operate it without needing a charging cable, although battery replacements are required periodically, depending on usage frequency.
How easy is it to clean the Beldray BEL02088 Lint Remover?
The lint remover includes a removable lint collection compartment that can be emptied quickly after use. Most users find maintenance simple because the protective cover and collection chamber can be cleaned easily to prevent buildup and maintain consistent performance.
What fabrics can the Beldray BEL02088 be used on?
The device works on sweaters, coats, blankets, sofas, cushions, scarves, and many knitted fabrics. It is especially useful for removing bobbles from wool and synthetic blends, helping extend the appearance and usability of frequently worn garments and household fabrics.
What are the common problems with the Beldray BEL02088?
Some users report that the lint container fills quickly during heavy use, while others mention reduced performance when batteries become weak. A few users also note that thicker fabric bobbles may require multiple passes for complete removal from heavily worn clothing.
Is the Beldray BEL02088 easy to use?
Yes, most users find the lint remover straightforward and beginner-friendly. Its lightweight design and simple controls allow quick fabric maintenance without complicated setup, making it practical for regular household use on clothes, furniture, and soft furnishings.
Is the Beldray BEL02088 Lint Remover worth buying?
The Beldray BEL02088 is considered a useful and affordable fabric care tool for maintaining clothing and upholstery. Many users appreciate its portability, ease of use, and ability to refresh fabrics quickly without needing expensive professional garment care services.