Jabra Speak2 55 Wireless Bluetooth Speakerphone
Overview
Microsoft Teams version
UC version
Included accessories
Optional accessories
Position guide
For the optimal audio quality, position the speakerphone in the center of the table, up to 2.3m/7.5 ft from each participant, but no closer than 0.5m/1.6ft.
How to charge
USB charging
Plug the speakerphone into a USB power source using the attached USB cable. The battery lasts for up to 12 hours of wireless use. Depending on the power output of the port, faster charging is available when using USB-C.
Automatic power off
To preserve battery while unplugged, the speakerphone will power off if it has not been connected to a Bluetooth device for 15 minutes. If connected to a Bluetooth device and not plugged into power, the speakerphone will power off after 8 hours of no interaction.
Battery status
To view the current battery status, tap the Battery status button. The LED ring will flash to indicate the status. When the battery status is critically low, the LED next to the Battery status button will flash red.
How to connect
It is recommended to connect to a computer using the integrated USB cable since this connection is certified and ensures an optimal audio quality. A standard Bluetooth connection to a computer is not certified and may not have the same audio quality as a USB connection.
Connect to a computer.
Plug the speakerphone into a USB-C or USB-A port on your computer.
You may need to set the Jabra Speak2 55 as the playback and recording device in your operating system audio settings and in the video conferencing tool (Microsoft Teams, Zoom, Cisco Webex, etc.) audio settings. The USB A adapter must not be removed from the cable and should not be used with other devices.
Connect to a smartphone or tablet.
Hold the Bluetooth button for 3 seconds and follow the voice-guided instructions to pair with your smartphone or tablet. The Bluetooth range is up to 10m/33ft.
To disconnect or reconnect, tap the Bluetooth button again.
How to use
Microsoft Teams version
UC version
Typical use
Smart button
The Smart button can be customized using Jabra Direct.
The options available are:
- Play/pause music (default)
- Mobile device voice assistant
- None
Microsoft Teams button
The LED next to the Microsoft Teams button behaves differently depending on the current status of Microsoft Teams. To quickly locate the Microsoft Teams button by touch, there is a small tab on the underside of the Microsoft Teams button.
The Microsoft Teams LEDs can show only one notification at a time. The Microsoft Teams button will interact with the last received notification.
Join a Microsoft Teams meeting.
When a scheduled Microsoft Teams meeting has started, the LED next to the Microsoft Teams button will flash purple. Tap the Microsoft Teams button on the speakerphone to join the meeting.
View Microsoft Teams missed calls and voicemail.s
If you have Microsoft Teams missed calls or voicemails, the LED next to the Microsoft Teams button will flash purple. Tap the Microsoft Teams button on the speakerphone to view the list of missed calls and voicemails on your computer.
Bring Microsoft Teams to foreground
When Microsoft Teams is running but is minimized, tap the Microsoft Teams button on the speakerphone to maximize and bring it to the foreground on your computer.
Raise/lower your hand during a Microsoft Teams meeting
During a Microsoft Teams meeting, hold (2 sec) the Microsoft Teams button on the speakerphone to raise/lower your hand. This action will be indicated by a yellow hand icon next to your name.
Status LED ring
Audio notifications
The speakerphone indicates factory reset, battery level, pairing and Bluetooth connection status. You can select tone or voice notifications using Jabra Direct.
The supported languages are English, Chinese Mandarin, German, French, Japanese, Korean, and Spanish.
Auto-reconnect
- When Auto-reconnect is enabled (default), the speakerphone will automatically connect to a previously paired Bluetooth device.
- If the speakerphone is used in a meeting room or by several people, it is recommended to disable auto-reconnect to avoid unintentional connections. If
- Auto-reconnect is disabled, the speakerphone will only allow one Bluetooth connection at a time, and all previously paired Bluetooth devices will be unpaired and need to be paired with the speakerphone again.
- Auto-reconnect can be configured in Jabra Direct.
- To pair a device with the speakerphone, hold (3 sec) the Bluetooth button on the speakerphone and follow the voice-guided instructions.
Factory reset
- Resetting the speakerphone clears the list of paired Bluetooth devices and also clears all personalized settings. After a factory reset, it is necessary to re-pair the Jabra Speak 55 to your Bluetooth devices.
- To factory reset, hold the Answer call button and the End call button for 8 seconds until ‘restore to factory default’ is announced by the speakerphone.
FOR MORE MANUALS BY JABRA, VISIT MANUALSLIBRARYY
Jabra Speak2 55 Wireless Bluetooth Speakerphone