SHOKZ OpenRun Pro S810 Bone Conduction Sports Headphones
ON/OFF
Turn on the headphones.
Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes blue.
Turn off the headphones.s
Press and hold the Power/Volume+ Button for 2 seconds until the LED Indicator flashes red.
Pairing
- Start with OpenRun Pro turned off.
- Press and hold the Volume+ Button for 5 seconds or until the LED Indicator flashes red and blue.
- Open your device’s Bluetooth settings and select “
OpenRun Pro by Shokz.” Audrey will say, “connected.”
Multifunction Button
Play/pause music
Click once.
Next song
Double-click while music is playing.
Previous song
Triple-click while music is playing.
Answer call
Click once.
End call
Click once.
Download the Shokz app
Manage multipoint pairing, upgrade firmware, change EQ modes, and more!
Download the Shokz App to easily control headphone settings.
Please refer to the following for more details:
https://www.userguide.shokz.net/openrunpro
Storage and Maintenance
- Store the headphones in a cool and dry place. The working temperature should be 0~45℃(32~113°F). Working in a cold/hot environment or a highly humid area, or an extremely low air pressure may reduce the battery life.
- Keep the product away from heat sources, direct sunlight, combustible gas, or other liquids.
- Keeping the charging port dry before connecting to the charger will reduce the risk.
- The headphones are water resistant, but are NOT waterproof. Please DO NOT submerge the headphones in water.
- Clean the headphones with a soft, dry cloth.
- Do not charge right after exercising, in case there’s sweat inside the charging port, which could lead to circuit burning while charging.
- After storage for a long period, please charge the headphones before using them again.
Note
Design and specification are subject to change without notice. For the most up-to-date product information, please visit www.shokz.com.
Manufacturer Declarations
Warranty
AfterShokz LLC gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.shokz.com or contact your Shokz partner. Before putting the product into operation, please observe the respective country-specific regulations.
Hearing Loss
Listening with headphones at high volume may affect your hearing, and the audio will be distorted.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of the specific absorption rate (SAR).
For more Manuals by SHOKZ, visit ManualsLibraryy