SteelSeries Arctis 1 Wireless Gaming Headset
WELCOME TO ARCTIS
- Your new headset is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible gaming headset by pushing the boundaries of sound quality, mic clarity, comfort, and style. Arctis is our glory; now go chase yours.
STEELSERIES ENGINE
- Download SteelSeries Engine to customize your audio settings and to integrate with Engine Apps (like Discord): steelseries.com/engine
PACKAGE CONTENTS
- Arctis 1 Wireless Headset
- USB-C Wireless Dongle
- USB Charging Cable
- USB-C to USB-A Adapter Cable
- ClearCast Microphone
SYSTEM REQUIREMENTS /COMPATIBILITY
- PC
- Playstation 4
- Nintendo Switch
- Android (with USB-C)
PRODUCT OVERVIEW
- Airweave Ear Cushions
- ClearCast Microphone
- Volume Wheel
- Microphone Mute Switch
- 3.5 mm Audio Jack
- Power Button
- Power LED
- Micro-USB Jack for charging and firmware updates
- Microphone Jack
- USB-C wireless Dongle
- Micro-USB charging Cable
- USB-C to USB-A Adapter Cable
- 3.5 mm Audio Cable
- Find accessories and replacement parts at steelseries.com/gaming-accessories
- Find accessories and replacement parts at steelseries.com/gaming-accessories
SETUP
WIRELESS SETUP
- Connection to USB-A
- PS4 SETTING > DEVICES > AUDIO DEVICES
Output to Headphones All Audio - Connection to USB-C
WIRED SETUP
CHARGING
- To charge the headset, connect the micro-USB charging cable 11 to the micro-USB jack 08 on the headset, and plug the other end into any USB power source.
The color of the power LED 07 indicates the battery level.
- Green 100–50 %
- Yellow 49–20 %
- Red 19–10 %
- Red (fast blink) 9–1 %
POWER ON/OFF
- ON
- To power on the headset, press and hold the power button 06 for at least 2 seconds. You will hear a tone, and the power LED 07 will illuminate.
- OFF
- To power off the headset, press and hold the power 06 button for at least 3 seconds
PAIRING
- Connect the USB-C wireless dongle 10 to a Windows PC with SteelSeries Engine installed
- Initiate wireless dongle pairing from the Engine
- With the headset off, press and hold the power button 06 for 6 seconds
- You will hear a tone when the pairing is completed
MICROPHONE
- Microphone attachment
- Position the microphone close to the corner of your mouth with the flat surface facing you
MULTIMEDIA CONTROL
Answer/end voice call- single · press Power Button 06
Play/pause music- single · press Power Button 06
Next track- double · · press Power Button 06
Previous track- triple ·press Power Button 06
Answer/end voice call
Play/pause music
Next track
Previous trackFor more manuals by SteelSeries, visit ManualsLibraryy
SteelSeries Arctis 1 Wireless Gaming Headset-FAQs
How can I tell if my Arctis 1 Wireless is fully charged?
The headset is fully charged when the LED light stops pulsing and eventually turns off.
How do I charge the Arctis 1 Wireless headset?
Connect the USB charging cable to the headset’s Micro-USB port, then plug the other end into any USB power source. This port is also used for firmware updates.
How do I reconnect my Arctis 1 Wireless headset?
Open SteelSeries Engine and click the refresh icon above the dongle. Then, with the headset off, hold the power button for at least 7 seconds until you hear a tone, confirming the pairing is successful.
Can SteelSeries Arctis headsets connect to a PC?
Yes, the Arctis 1 Wireless connects to a PC using the 2.4GHz wireless dongle. It offers reliable, low-latency wireless audio.
Can I use the Arctis 1 while it’s charging?
Yes, you can use the headset while charging. It supports charging via Micro-USB without interrupting your gameplay.
How long does it take to fully charge the headset?
It typically takes around 2 hours to fully charge, depending on your power source.
Does the Arctis 1 Wireless have Bluetooth?
No, the Arctis 1 Wireless does not use Bluetooth. It uses a 2.4GHz wireless connection for faster, gaming-grade performance.
How do I update the firmware on my SteelSeries headset?
Connect the wireless dongle to your PC. If an update is available, SteelSeries Engine will display a red banner. Click it to begin the firmware update.