Blog Post

BELLA Stainless Steel 2 Slice Toaster-featured

BELLA Stainless Steel 2 Slice Toaster Instruction Manual

Bella -logo

BELLA Stainless Steel 2 Slice Toaster

BELLA Stainless Steel 2 Slice Toaster-product

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. READ ALL INSTRUCTIONS.
  2. Do not touch hot surfaces. Use handles or knobs.
  3. To protect against electrical shock, do not immerse the cord, plugs, or appliance in water or other liquid.
  4. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  5. Close supervision is necessary when any appliance is used by or near children.
  6. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
  7. Do not operate any appliance with a damaged cord or plu,g or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
  8. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
  9. Do not use outdoors.
  10. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
  11. Do not place on or near a hot gas or electric burner, or in a heated oven.
  12. To disconnect, press any illuminated CANCEL button(s), then remove the plug from the wall outlet.
  13. Do not use the appliance for anything other than its intended use.
  14. Oversized foods, metal foil packages, or utensils must not be inserted in a toaster as they may involve a risk of fire or electric shock.
  15. A fire may occur if toasters are covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation.
  16. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
  17. Do not attempt to dislodge food when the toaster is plugged in.
  18. Do not operate unattended.
  19. When heating toaster pastries, always use the lightest toast color setting.
  20. Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to OFF, then remove the plug from the wall outlet.

SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

ADDITIONAL IMPORTANT SAFEGUARDS

CAUTION HOT SURFACES: This appliance generates heat and escaping steam during use. Proper precautions must be taken to prevent the risk of burns, fires, or other injury to persons or damage to property.

WARNING: ELECTRICAL SHOCK HAZARD. Never attempt to dislodge food inside the toaster while the toaster is plugged in. Doing so could cause an electrical shock hazard or a risk of fire.

CAUTION: This appliance is hot during operation and retains heat for some time after turning off. Always use oven mittens when handling hot materials and allow metal parts to cool before cleaning. Do not place anything on top of the toaster
while it is operating or while it is hot.

  1. A person who has not read and understood all operating, toasting, and safety instructions is not qualified to operate this appliance. All users of this appliance must read and understand this Instruction Manual before operating
    or cleaning this appliance.
  2. If this appliance falls or accidentally becomes immersed in water, unplug it from the wall outlet immediately. Do not reach into the water!
  3. When using this appliance, provide adequate air space above and on all sides for air circulation. Do not operate this appliance while it is touching or near curtains, wall coverings, clothing, dish towels, or other flammable materials.
  4. To reduce the risk of fire, do not leave this appliance unattended during use.
  5. If this appliance begins to malfunction during use, immediately press the illuminated CANCEL button and unplug the cord. Do not use or attempt to repair a malfunctioning appliance!
  6. The cord to this appliance should only be plugged directly into a 120V AC electrical wall outlet.
  7. Do not use this appliance in an unstable position.
  8. Use the toaster on a hard, flat surface. Do not place a toaster near a flame or heat or on a soft surface (such as carpet). Avoid placing it where it may tip over during use. Dropping the toaster could cause it to malfunction.
    NOTE: This toaster is equipped with an Anti-Jam feature. If any toast or toaster food gets jammed, the toaster will shut off automatically.

CAUTION!

  • DO NOT toast pastries with runny fillings or frosting.
  • DO NOT toast torn slices of bread.
  • DO NOT place buttered bread or wrapped food into the toaster.
  • DO NOT toast small-sized breads, mini-baguettes, breadsticks, etc.

NOTES ON THE PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, the plug can fit into a polarized socket only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

NOTES ON THE CORD

  • A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
  • Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.
  • If a long detachable power supply cord or extension cord is used:
    • The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
    • If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
    • The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

PLASTICIZER WARNING

CAUTION: To prevent Plasticizers from migrating to the finish of the countertop or tabletop or other furniture, place NON-PLASTIC coasters or place mats between the appliance and the finish of the countertop or tabletop. Failure to do so may cause the finish to darken; permanent blemishes may occur, or stains can appear.

ELECTRIC POWER

If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Getting to Know Your Toaster

Product may vary slightly from the illustrationBELLA 2 Slice Toaster 1

Before Using For The First Time

  1. Remove all packaging materials, including those that may be inside the toasting slots or the toasting lever slot.
  2. Wipe the stainless steel exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
  3. Do not put the toaster, cord, or plug in water.
  4. Make sure both of the crumb trays are locked in position on the bottom of the toaster and both left and right toasting levers are in the UP position.
  5. Unwrap the power cord from the cord storage area on the underside of the toaster and plug it into a 120V AC outlet.
  6. Turn both left and right brown control dials to (1), the lightest setting.
  7. Lower both left and right toasting levers until they lock in place. It is recommended to run 2 cycles of toast without bread before the first use.
    NOTE: The Toaster may emit a thin smoke on initial use. This is normal and not detrimental to the performance of the toaster.

Automatic Centering Guides

Lowering either the left or right or both toasting lever(s) closes the centering guides and holds the bread or toaster food centrally in the toasting slots.
NOTE: The toasting lever(s) will not lock down unless the toaster is plugged into a 120V AC electrical outlet.

Toasting Instructions

  1. Before toasting, make sure both the left and right crumb trays are in position on the bottom of the toaster and both left and right toasting levers are in the UP position.
  2. Make sure no bread or other objects are inside the toasting slots. Place the toaster on a flat, level, heat-resistant surface.
  3. Remove all protective wrappings from food before placing it into the toasting slot(s).
    IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged in the toasting slot(s).
  4. Plug the power cord into a 120V AC electrical outlet.
  5. Insert bread or toaster food into 1 to 4 of the toasting slots. Lower the corresponding left or right toasting lever(s) until locked into place. The automatic centering guides hold food upright for uniform side-to-side toasting. When the bread is lowered into position, the corresponding left or right CANCEL button(s) will illuminate, and toasting will begin.
    NOTE: The toasting lever(s) will not lock into position unless the toaster is plugged into a 120V AC electrical outlet.
    NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
    NOTE: To prevent a fire hazard, never place bread over the opening of the toaster; always place
    bread into the slots.
    NOTE: DO NOT change the browning selection during the toasting cycle. Press any illuminated CANCEL button(s); then turn the browning control dial to adjust. Lower the corresponding left or right toasting lever(s) and toast until the desired toast color is achieved.
  6. At the end of the toasting cycle, bread or toaster food will rise automatically. Use the high lift lever to remove smaller toaster foods, such as English muffins.
  7. Remove bread from the toasting slot(s). Use care when removing bread, as the bread and the top of the toaster will still be hot.
    IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.
  8. To interrupt toasting, press either the left or right or both illuminated CANCEL button(s).
  9. Unplug the cord from the wall outlet when not in use and before cleaning. Do not attempt to dislodge food when the toaster is plugged in.

Reheat Cycle

  1. Use the reheat to warm through toasted bread or any toaster food that has cooled. Rotate the browning control dial to Reheat.
    NOTE: This toaster has a special setting for reheating toast, which overrides the toaster’s browning setting.
    IMPORTANT: Use REHEAT cycle with plain, unbuttered toast ONLY.
  2. Place bread into 1 to 4 of the toasting slots.
  3. Lower the corresponding left or right toasting lever(s) until locked into place. The automatic centering guides hold food upright for uniform side-to-side toasting. The corresponding CANCEL button(s) will illuminate, and the REHEAT cycle will begin.
  4. At the end of the REHEAT cycle, the toasting lever(s), reheated bread, or toaster food will rise automatically, and the toaster will turn OFF.
  5. Remove bread or toaster food from the toasting slot(s). Use care as the top of the toaster will still be hot.
    IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.
  6. To interrupt the REHEAT cycle, press the corresponding illuminated CANCEL button(s).
  7. Unplug the cord from the wall outlet when not in use.

Cancel Button

  1. When the toasting lever is lowered, the corresponding CANCEL button(s) will illuminate, and toasting will begin.
  2. To stop or interrupt any toasting cycle, press the illuminated CANCEL button(s). The bread or toaster food will automatically rise; the toaster will turn OFF.
  3. Unplug the cord from the wall outlet when not in use.

Convenience Food Toasting

Many varieties of packaged convenience food are available today, both frozen and non-frozen (shelf pastry). Since toaster foods and individual tastes vary, it is difficult to recommend exact browning settings. However, after a little experimentation, you will discover the best setting for your needs. You may also wish to refer to the heating instructions on convenience food packaging.

Toaster Pastry

For best results, follow the instructions printed on the pastry package. If the package does not have instructions, position the left or right corresponding browning control dial to medium, between (3) and (4). Some pastries may require a second toasting cycle.

NOTE: Do not use this toaster for toasting pastry items with runny-type frosting or open fillings.

CAUTION: Never leave the toaster unattended when toasting pastries.

Non-Frozen Shelf Pastry

Turn the corresponding left or right brown control dial(s) to a lighter setting. For thicker convenience foods, it may be necessary to adjust the browning control dial(s) to a higher setting / longer toasting cycle.

Removing Lodged Foods

NOTE: This toaster is equipped with an Anti-Jam feature. If any toast or toaster food gets jammed, the toaster will shut OFF automatically.

  1. If, after toasting, a piece of bread or any other toaster food becomes lodged in any of the toasting slots, unplug the toaster and allow it to cool.
  2. Hold the toasting lever down. Turn the toaster upside down and shake the food loose.
    IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.
  3. Clean either or both of the crumb trays and replace.

Important Points

  • Remove all protective wrappings from food before placing it into the toasting slot(s).
  • For best results, clean the crumb tray(s) frequently.
  • Different breads require different color settings. Press the illuminated CANCEL button at any time to check the toast color.
  • Do not block extra-wide toasting slots. Never place any object over the top opening.
  • Do not toast buttered bread, buttered Texas toast, buttered English muffins, buttered bagels, or buttered pita bread. Melted butter will cause a fire
  • When toasting more than 1 slice of bread, use slices of similar size, thickness, and freshness.
  • Stale bread, thin bread, or sweet bread products, such as tea cakes and fruit loaf, brown much more quickly than ordinary bread, so they should be toasted on the lighter settings.
  • Never immerse the toaster, cord, or plug in water or other liquid.
  • Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.

User Maintenance Instructions

This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly other than cleaning must be performed by a qualified appliance repair technician.

Care & Cleaning Instructions

CAUTION: Do not immerse the toaster, cord, or plug in water or any other liquid.

CAUTION: Be sure the toaster is unplugged before cleaning.

CRUMB TRAY: Both left and right crumb trays are located on the bottom of the toaster. Working over a sink or garbage receptacle, pull each crumb tray out of the back to remove. Wipe crumb tray(s) with a clean, damp cloth. Push crumb tray(s) back into position. Make sure both left and right crumb trays are locked securely into the bottom of the toaster.

EXTERIOR: Wipe the toaster exterior with a clean, damp cloth. Do not use abrasive cleaners. Do not put cord or plug in water or liquid.

Storing Instructions

  1. Unplug the unit, allow it to cool, and clean it before storing.
  2. Store the toaster in its box in a clean, dry place.
  3. Never store a toaster while it is hot or still plugged in.
  4. Never wrap the cord tightly around the appliance; use the storage area on the bottom of the toaster.
  5. Do not put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.

Limited TWO-YEAR Warranty

SENSIO Inc. hereby warrants that for a period of TWO YEARS from the date of purchase, this product will be free from mechanical defects in material and workmanship, and for 90 days with respect to non-mechanical parts. At its sole discretion, SENSIO Inc. will either repair or replace the product found to be defective or issue a refund on the product during the warranty period. The warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.

EXCLUSIONS:

The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel. Also, the warranty does not cover Acts of God, such as fire, floods, hurricanes, or tornadoes. SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province, and/or jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE:

You must contact Customer Service at our toll-free number: 1-866-832-4843. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to SENSIO Inc. Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc. shall bear no responsibility or liability for the returned product while in transit to SENSIO Inc.’s Customer Service Center.

For more manuals by BELLA, visit ManualsLibraryy

BELLA Stainless Steel 2 Slice Toaster-FAQs

Is a stainless steel toaster safe to use?

Yes, stainless steel toasters like the BELLA 2 Slice model are safe, durable, and free from harmful coatings, making them ideal for everyday toasting.

What is the ideal wattage for a 2-slice toaster?

The best wattage range is between 800W and 1200W, offering a good balance of speed and energy efficiency for even toasting.

Do the sides of a stainless steel toaster get hot?

Yes, the exterior may get warm during extended use, but stainless steel helps dissipate heat quickly, reducing the risk of overheating.

Can you toast one slice of bread in a two-slice toaster?

Yes, you can toast one slice. For best results, use a lower browning setting, as one slice toasts faster than two.

How do I clean a burnt stainless steel toaster?

Use a soft sponge with white vinegar or baking soda to remove burnt marks. Avoid abrasive scrubbing to prevent damage to the surface.

Is it safe to put foil in a toaster?

No, avoid placing foil inside the toaster as it can touch the heating elements and pose a fire risk.

How much power does a 2-slice toaster use?

Most 2-slice toasters, including BELLA’s, use around 800 to 1200 watts, consuming roughly 0.1 kWh per 5-minute use.

How do I clean inside the toaster?

Unplug the toaster and remove the crumb tray. Use a soft brush to gently dislodge crumbs from inside without touching the heating coils.

What makes a good 2-slice toaster?

A quality toaster should offer even browning, wide slots for thick bread or bagels, adjustable settings, and an easy-to-clean design.

Is the BELLA toaster non-toxic and BPA-free?

Yes, the BELLA Stainless Steel Toaster is designed with food-safe, non-toxic materials, ensuring safe contact with food.

Leave a comment

Your email address will not be published. Required fields are marked *