Turtle Beach Stealth 700 Gen 3 PC Gaming Headset
PACKAGE CONTENTS
- Two CrossPlay Transmitters
- Charging Cable (USB-A to USB-C)
- Stealth 700 Gen 3 Gaming Headset
CONTROLS
- EQ Mode Button
- Game Volume
- Variable Mic Monitoring
- USB Charge & Update Port
- Power/Superhuman Hearing Button
- Press (2s) – Power On/Off
- Press (1s) – Superhuman Hearing On/Off
- CrossPlay Button
Press (1s) – Switch between transmitters
- Bluetooth Volume
- Bluetooth Multi-Function Button (MFB)
See Bluetooth Pairing Setup
- Bluetooth Status LED
FLIP-TO-MUTE MIC
CROSSPLAY WIRELESS SYSTEM
The CrossPlay Wireless System allows you to wirelessly switch between two platforms by pressing the CrossPlay Switch button on the headset.
Press the CrossPlay switch button on the headset to switch between the two wireless transmitters.
NOTE: Both wireless transmitters must be connected and powered on to allow switching. Switching transmitters will not automatically power on the source platform the transmitter is connected to.
The LED on the Transmitters will indicate which transmitter is active, and whether the mic on the headset is muted, as indicated in the following chart:
| TRANSMITTER STATUS | LED COLOR |
| Paired (Active Transmitter) | GREEN |
| Paired (Transmitter On Standby) | AMBER |
| Mic Is Muted | RED |
BLUETOOTH SETUP
BLUETOOTH PAIRING
The Stealth 700 will enter Bluetooth pairing mode when first powered on. If no Bluetooth connection is made within two minutes, Bluetooth pairing mode will stop.
To manually enable Bluetooth pairing mode at any time:
- Press and hold the Bluetooth Multi-function Button (MFB) until the “Pairing Bluetooth” voice prompt plays.
- After placing your headset in the Bluetooth pairing mode, select the headset from within your device’s Bluetooth settings menu to connect.
- The Bluetooth MFB is used to answer and end calls as well as for media playback control when connected to a compatible mobile phone.
ANSWERING AND ENDING PHONE CALLS
When the headset is connected using the USB wireless transmitter in the default 2.4GHz Wireless mode, incoming calls can be answered by single-pressing the Bluetooth MFB. The headset will switch back to 2.4GHz Wireless Mode when the call is ended, either by single-pressing the Bluetooth MFB again, or by using your mobile phone to end the call.
PLAYSTATION SETUP
- Connect the wireless transmitter to the USB Port on a PC.
- [Optional] Connect the second wireless transmitter to the USB port on a PlayStation console or a secondary PC.
- Press the Power button for 2 seconds to power the headset on.
- Wait for the headset and USB wireless transmitter(s) to pair.
For more Manuals by Turtle Beach, visit ManualsLibraryy